All new hardware

[Edsnextproject]

Do any of my fellow builders have a list of suspension hardware. I’m starting a 818C , Not using a donor.
The bigger components are easy to find New. Just looking for component bolts, nuts, spacers , etc. that would normally come from uninstalled Donor parts?
Thanks in advance........Ed

[redbudrr]

I used Libertyville Subaru on line parts diagrams for any parts I needed.

[Bob_n_Cincy]

Do any of my fellow builders have a list of suspension hardware. I’m starting a 818C , Not using a donor.
The bigger components are easy to find New. Just looking for component bolts, nuts, spacers , etc. that would normally come from uninstalled Donor parts?
Thanks in advance........Ed

Ed
here is a link to a BOM that I made.
My hardware came from the donor, MMC (McMastercarr) or Bellmetric.
Let me know if you can see this document?
Bob



https://1drv.ms/b/s!AgduxxAs3q-xgwG519GG6RmAqGff?e=fYW1Pi

[flynntuna]

I can see it. Thank you this will be helpful.

[Edsnextproject]

Thanks, Bob, I got it!

[maclonchas]

Bob I know this thread is old, but if you still have that spreadsheet available I would like to get a copy. I went to the 1drive and it has been taken down.

Thanks

Bill

[Bob_n_Cincy]

Reposted to my onedrive https://1drv.ms/x/s!AgduxxAs3q-xhjtOVYqMYSivaTDW?e=cIpiuJ

[maclonchas]

Bob,

Thanks this helps immensely as I start to refine where I will go on this build.

Thanks

Bill

[MarvelTrick]

Reposted to my onedrive https://1drv.ms/x/s!AgduxxAs3q-xhjtOVYqMYSivaTDW?e=cIpiuJ

Hi Bob, sorry to bother you think you could share that link again for me please?

[Bob_n_Cincy]

Hi Bob, sorry to bother you think you could share that link again for me please?

https://1drv.ms/x/s!AgduxxAs3q-xjEE2IWLOZhKXCd0z?e=865UoP