View Full Version : Tangent 1.5” clamp
Rockon
09-20-2019, 10:20 PM
Looking for a tangent roll bar clamp for the MKIV 1.5” size
RBachman
09-21-2019, 08:52 AM
Speedway Motors them and they don't look badly priced. Here's a link [URL="https://www.speedwaymotors.com[/URL] Look under roll cage, roll cage kits, and then accessory tube clamps.
Hope that helps
Jeff Kleiner
09-21-2019, 09:05 AM
Speedway Motors them and they don't look badly priced. Here's a link [URL="https://www.speedwaymotors.com[/URL] Look under roll cage, roll cage kits, and then accessory tube clamps.
Hope that helps
Totally different part and purpose.
Jeff
Speedway Motors them and they don't look badly priced. Here's a link Look under roll cage, roll cage kits, and then accessory tube clamps.
Hope that helps
Totally different part and purpose.
Jeff
What Jeff said. This is what the OP is looking for:
https://thefactoryfiveforum.com/attachment.php?attachmentid=100270&d=1546815747
I haven't seen anything that is similar, but there are some tube splice kits for roll cages that may be options to consider. You would still need to drill the bars, but wouldn't have the Frankenstein bolt. You could also consider the Breeze roll bars, which are a very nice looking bar.
[url]https://www.breezeautomotive.com/shop/roll-bar-parts-kit-1-3-4-carbon-steel/ ("https://www.speedwaymotors.com[/URL)