BluePrint Engines 427 EFI Dyno Pull Video

[BluePrintEngines]

Good day Everyone!

We get constant requests to know what our 427 sounds like! Its in a dyno cell, so a little quieter, but Johnny did a video during an Appreciation dinner we Hosted for area First responders.

We had self guided tours going on with one of our R&D dyno cells up and running! pretty cool!!!

This beast made pretty good power!!

check out our FFR packages at Factoryfiveengines.com !

https://www.youtube.com/watch?v=cTOLGD7IgdU&t=54s


https://www.youtube.com/watch?v=cTOLGD7IgdU&t=54s

[FLPBFoot]

Yep, sounds pretty much like mine! I love the cam you guys use. Great lope at idle and produces a TON of torque. I had mine into the dyno tuner and his description of it was "Torque Monster".

114573

I had to switch to a K&N filter as the standard oval Cobra air cleaner and filter robs about 40 hp. K&N tested this filter and it will only flow 520 cfm. Way too restrictive for this motor. This 3 inch K&N with the filter lid flows 820 cfm.

Love my Blue Print. Thanks guys!!

Steve

[BluePrintEngines]

Thanks Steve!

funny you mention filters, as we did do some testing lately and were able to pick up quite a bit also. Hood clearance is always an issue with a taller filter, especially on the victor intake 427's. But the KNN did prove itself on this one.

[WIS89]

You guys rock!

Good for you sponsoring a nice event for the first responders and their families. What a nice distraction for these folks, and they get to check out a pretty cool facility too.

I haven't fired mine up yet, but it's getting closer. I look forward to hearing that sound!

Nice job y'all!

Regards,

Steve

[BluePrintEngines]

Thats all our owner. He's a great guy. We had a little meeting before the dinner, and he couldn't say enough about how important these people are, and they don't receive enough appreciation. So he threw them this dinner all on his own. Pretty stand up fella if ya ask me!

- Johnny Mac