View Full Version : Rear Cockpit Panel - Harness Hole Interference
My rear aluminum panel doesn’t seem to be fitting right. I have it mocked up and the harness holes are sitting at the same level as the rear crossmember. I would have thought that the harness holes should fit above the rear cross member?
Any thoughts on how to correct it?
Thanks
Brian
ChasNMe
09-07-2019, 03:47 PM
pics would be great, but if i understand you . . . most people have said that you should have the crossbar cover a little bit of the bottom of the hole so that the straps dont chaf and get cut on the hole, they rub the crossbar instead. i think the pics i saw were like 1/16" or so of the crossbar shown at the bottom of the hole
michael everson
09-07-2019, 03:52 PM
ChasNMe is right. the cross bar will block about half the harness hole.
Mike
Okay. Thanks. It’s about halfway on mine.
BEAR-AvHistory
09-08-2019, 10:55 AM
Mike did not mention it but he makes nice finishers for the belt openings
https://thefactoryfiveforum.com/attachment.php?attachmentid=113918&d=1567958016