rear brake hose mounting

[rolfer]

can someone tell me if this is right for the rear brake hose? i tried putting it on 180º and it seemed to hit the halfshaf unless i bend it.

thanks!

113506

[beeman]

I had mine installed by previous builder per the manual. The hose was touching something (the coil over if I remember correctly) . I looked at the C5 orientation and copied it, no more rubbing.

https://s17.directupload.net/images/190901/c5yjfcr4.jpg

[rolfer]

could you possibly take a picture of from the back side? that way i can see how it should go. i have searched the internet for a picture of the back side but have had no luck. thanks!

[Shoeless]

Not sure if this will help, but here is my Wilwood setup. I think I have 18 inch lines, 45 deg fitting out of the calipers and straight fitting through the wheel well wall.

https://i.imgur.com/M3huR5Y.jpg

https://i.imgur.com/dgRtQPK.jpg

https://i.imgur.com/8piiFZo.jpg

[beeman]

At full droop

https://s17.directupload.net/images/190903/zvi4mnpa.jpg

https://s17.directupload.net/images/190903/kbemybyi.jpg

[rolfer]

wow thanks!!!!!! that really helps a lot.

you rock!! :D