Unfinished MK4 Complete Kit For Sale in Texas SOLD

[calucyk]

Factory Five Racing MK4 roadster, serial number F5R1009555RD, rolling chassis complete - your engine and paint, and it is ready to drive!

Complete kit with the following FFR options. As configured, $29,500, but there is more – it comes with:
1. Freshly coated black ceramic side pipes ($500)
2. New Nitto NT05R 315/35 R17 rear tires mounted on Halibrand replica wheels 17x10.5 ($600)
3. New Michelin Pilot Sport 4S 245/45 R17 front tires mounted on Halibrand replica wheels 17x9 ($400 in tires)
4. New LoKar throttle bracket (TCB-40HS) and cable (TC-1000U36) ($135).

The total is $31,135.

Rolling assembly is complete. Just need to drop in your engine, fit body parts, and paint! It will save you roughly 100-150 hours of assembly!!

Chassis is located in Fort Worth, TX near I-820 and Las Vegas Trail.

https://www.icloud.com/sharedalbum/#B0aGdIshaGOYsAl

$22,500. All reasonable offers considered. Not interested in trade. PM if interested. Motivated to sell.

FFR Options:
50013: MK IV COMPLETE KIT
16613: POWDERCOATING ROADSTER CHASSIS
13083: 302-351 ENGINE/TRANS MOUNT KIT
14758: 3-LINK DELUXE REAR SUSPENSION
16445: 351W HEADERS AND FASTENERS WITH KIT
16350: 31 SPLINE 11.25" DRIVESHAFT
12070: BODY CUT-OUTS
16213: BOX 9 B BLACK LEATHER SEATS UPGRADE
16138: POWER STEERING COMPONENTS w/COMPLETE KIT
12066: FRONT LOWER ARMS - STANDARD WIDTH
16004: FFR GPS GAUGE SET W/KIT
14865: 17x9/10.5, 5LUG HALIBRAND REPLICA WHEELS
12042: SUN VISORS
15549: ROADSTER WIPER KIT
16116: RDSTR FRONT SWAYBAR COMPS (4/14/15 +)
12469: BRAKE DUCT WIRE MESH
14816: ROADSTER HEATER/DEFROSTER
15154: MK IV LOGO FLOORMATS
33862: EFI IN-TANK FUEL SYSTEM
15158: 1.50" ROLLBAR GROMMET SET
15659: ASSEMBLED SIDE LOUVER SET
16590: TRUNK GAS STRUT KIT
16285: PERFORMANCE 11.65" REAR BRAKE SET
16204: STANDARD (MOSER) 8.8 REAR AXLE HOUSING W/3-LINK
15101: 1.50" MK IV LH CHROME ROLL BAR UPGRADE

[edwardb]

Nice looking kit with options. Good luck with the sale. You may want to check the serial number you listed though. That looks like your sales order number, e.g. the number on the name tag with your kit plus on your sales paperwork. The actual chassis number, which is much more meaningful to prospective buyers, is engraved on the 2x2 chassis tube under the steering column. Right about where your left knee would be sitting in the car. The last four digits are the numerical chassis number. The same number is also on your Manufacturers Certificate of Origin, which I assume you have.

[calucyk]

Oh my gosh. Thanks for pointing that out. Much appreciated. Yes I have the Manufacturers Certify of Origin. Best, Tony

[edwardb]

Oh my gosh. Thanks for pointing that out. Much appreciated. Yes I have the Manufacturers Certify of Origin. Best, Tony

I'd suggest posting the actual number (the last four digits). As I said, that's meaningful to some prospective buyers. Gives the vintage of the kit. Beyond just saying it's a Mk4.

[jonathan88]

do you have any photos? thanks!

[calucyk]

Here is a link to the rolling chassis pictures. I have a bunch more from assembly, if interested.

https://www.icloud.com/sharedalbum/#B0aGdIshaGOYsAl

Thanks, Tony

[calucyk]

Dropping the price to $22,900 making it a >$8,000 discount over buying the parts retail. And you get a rolling chassis too!

Link to pictures above. PM if interested.

Regards, Tony

[GoDadGo]

This price is a real deal; however, have you considered keeping the car and bringing in some professional help?

Jeff Kleiner, 65 Cobra Dude (Henry) &, Mike Everson are just a few of the better builders.

Also, Mark Daugherty "The Traveling Builder" will come to you.

Either path you choose, I wish you luck!

Steve

[Warden]

Is the car still for sale?

[calucyk]

Thanks for the referrals. Yes, I am evaluating all options. I searched the Internet for Texas builders, reached out to a couple of builders, without success (no response). But this gives me a few more options to consider. Thanks Steve - appreciate it. Tony

[calucyk]

Warden, I sent you a PM. Thanks, Tony

[65 Cobra Dude]

Thanks for the referral Steve! Tony, I am located in SW FL and can finish the car for you if that's the path you want to take? You will always get more for a completed car with more potential customers. I'll PM you my contact info and we can discuss if you're interested.

Thx,

Henry

[GoDadGo]

Here is an example of Henry's (65 Cobra Dude) work:

https://youtu.be/sUAnYcvbxyE

Heat & Air Conditioning
Power Steering
Power Brakes
Under Car Exhaust
Coyote Power
Custom Roll Bars
Custom Dash
Custom Top
Custom Everything

[LS-Underdog]

Please let me know if it's still for sale...PM sent

[calucyk]

Buyer backed out of deal due to COO and Virginia DOT varying signals. Car is for sale again. Price reduced slightly.

[Aircontroller]

Pm'ed you


Buyer backed out of deal due to COO and Virginia DOT varying signals. Car is for sale again. Price reduced slightly.

[i.e.427]

Sending you a PM just in case you're interested in finishing the car.

[mav]

pm sent

[FCABARLE]

PM sent

[FCABARLE]

Is you car still available? Please respond. Thanks

[calucyk]

Sorry, sent you a PM. Thanks, Tony

[calucyk]

Again, thanks for all the inquires and support on this thread. The car sold last night. Regards, Tony