View Full Version : Front overrider mounting
Lowrod
08-06-2019, 03:00 PM
111922111923111924
I had a local tool shop modify my FRONT quick jack bolts allowing me to mount overriders without any issues. Take a look at the photos, let me know what you guys think!
dpariso
08-06-2019, 03:41 PM
Sweet! I like the mod... its clean
michael everson
08-07-2019, 05:52 AM
Curious where you got those over riders? Not FFR. You might find they will look a bit funny straight up and down on the front. The FFR supplied ones are angled out at the top to follow the angle of the nose opening.
Mike
DadofThree
08-07-2019, 12:24 PM
Looks good!
Jeff Kleiner
08-07-2019, 12:50 PM
Curious where you got those over riders? Not FFR. You might find they will look a bit funny straight up and down on the front. The FFR supplied ones are angled out at the top to follow the angle of the nose opening.
Mike
I had the same thoughts.
Jeff
Greg K
08-07-2019, 12:59 PM
I had the same thoughts.
Jeff
They appear to be from **********.
AC Bill
08-07-2019, 03:32 PM
You couldn't ever add a hoop to those, and have it look good, with them sitting vertical like that. Not that was ever in your plans.
https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSidTtE2tTrfAZ8FS_ihClFc8gmaBBYt 9OenRBfsMTrfpbd84Vvzw
Boydster
08-08-2019, 02:45 AM
Those are def **********. I have the same ones. Installing the rears is going to be, um, interesting.
jrcuz
08-08-2019, 06:47 AM
I have the finish line over riders and I'm using smaller diameter bolts on the front with different lengths, longer on top and shorter on the bottom and several washers. On the rear I"m using a modified
"Kleiner" mod and brackets I made to attach the over riders to the threaded rod.
JR112055112054112053112052112051
Lowrod
08-08-2019, 08:11 AM
So it’s back to the drawing board! I did not realize the front over riders were tilted to match the front end angle. Thanks for the info. I’ll be back!
j.miller
08-11-2019, 05:47 PM
You can tilt them by adding a few washers...…..The "Kliener mod" don't even get me started...da bat
Jeff Kleiner
08-12-2019, 06:15 AM
On the rear I"m using a modified
"Kleiner" mod
YES!!! Now we're modding the mods...I love it :cool:
Jeff
PS---Miller is right; you don't want to get him started. And you definitely don't want to let him into your house after 8PM unless you're prepared for a loooooooong night. :eek:
rich grsc
08-13-2019, 08:54 AM
Saw off the front of the nose, then bond it back on straight up an down. :eek: Either one of the Jeff's can fix that right up. :rolleyes:
Lowrod
08-14-2019, 07:04 PM
Got enough body work to do without sawing off the nose of the car! But I like the idea!