Anyone have a left-over body buck in MA?

[rsw81]

I'm expecting my kit within the next two weeks, already built a chassis dolly, now looking to build a body buck. Figured before I do so I'd ask if anyone is done with theirs in the greater Boston area.

[Joecobr]

A body buck is really not needed. Buy a couple of inexpensive kayak lifting devices for either end of the body and put a 2x4 brace across the cabin cowls and you're done. The beauty of this system is that it is a one man operation to lift and lower. You'll appreciate it when you go to test fit the body multiple times. I built a body buck and quickly ditched it. Live and learn!

[rsw81]

A body buck is really not needed. Buy a couple of inexpensive kayak lifting devices for either end of the body and put a 2x4 brace across the cabin cowls and you're done. The beauty of this system is that it is a one man operation to lift and lower. You'll appreciate it when you go to test fit the body multiple times. I built a body buck and quickly ditched it. Live and learn!

If I were lifting it up over my chassis, I would do exactly this, but unfortunately am storing the body outside. Chassis is going up on a lift so my daily driver can be under it when not working on it.

[chuckster]

I live 20 miles south west of Boston and I’ve got a body back you can have p.m. me

[rsw81]

I live 20 miles south west of Boston and I’ve got a body back you can have p.m. me

PM sent, awaiting your response. Thanks!