mdutton11
06-22-2019, 07:50 PM
Looking at Don Payne's PDF's of the passenger footbox mod drawings. Does anyone have a link to the drawings in full scale that can be printed at a copy / print shop? The only ones I see are for 8 1/2 X 12.
Cheers
phileas_fogg
06-23-2019, 05:05 PM
I recommend you make some cardboard templates based on those dimensions & tape them into place on your car. When I did mine I found that a couple of dimensions required “adjustment” to the tune of 1/2” (on the outside wall & front panels if I recall correctly). You’ll also be able to better match the curve where the inside panel meets the 4” tube on the inside panel.
John
https://live.staticflickr.com/4300/36123229882_32c386dedd_k.jpg (https://flic.kr/p/X35ZJj)IMG_2116 (https://flic.kr/p/X35ZJj) by jhsitton (https://www.flickr.com/photos/91016165@N07/), on Flickr