Hot Rod AC Installation Instructions

[timdks]

Is there an update to the Hot Rod Ac Installation Instructions published 9/25/2009? The instructions end with the installation of the Evaporator Installation on page 21, but don't touch on installation of the dryer, heater control, hose connections and wiring, and final installation, including placement and wiring of the controls when the body is in place. I'm working on the AC/Heater now so more complete instructions would be helpful. Thanks.

[Brian Z]

Private message sent. I need your e-mail. =)

[timdks]

Private message sent. I need your e-mail. =)

Just responded to your PM, and sent a separate email. Appreciate your help.

[jgarner]

Hi Brian, I'm working on installing AC as well. Any additional information you can provide will certainly be appreciated. I have the AC side pretty much figured out, but need a clue on where to mount the heater water control solenoid. The FFR instructions show running the heater hoses directly into the evaporator. I don't think this is correct. Also, which of the two hose fittings coming out of the water pump is the suction side (302 with reverse rotation pump). Thanks in advance for your help. Joe email jgarner@indyne.com

[sheephearder]

Bryan, I'd like a copy also. Some pictures would be very helpful from anyone showing their passenger side engine bay. Thanks Tim for bringing this up as I just finished the inside hose install this afternoon.

[Brian Z]

I will send it to in in an e-mail if you would like. Please send me a quick e-mail and I will send over a copy of the instructions.
brian.z@factoryfive.com