John Dol
05-29-2019, 04:16 PM
Yesterday I put the trim on the windshield (my fingers still hurt, I know wah wah). Installed a foam perimeter so the adhesive would be contained and give more of a finished look. Glued the rearview hanger to the windshield. Then filled the void with adhesive and installed the windshield. Stealing from Matt's thread I used a strap and some 2x4's to put enough pressure on the windshield to stay in place.
Came out looking good. This was another job I overcame to do myself after reading the forum!
Then hung the drivers door, installed the side mirror and sliding window.
Pretty good day
John
Came out looking good. This was another job I overcame to do myself after reading the forum!
Then hung the drivers door, installed the side mirror and sliding window.
Pretty good day
John