FFR TYPE 65 For Sale

[Redmantice]

I have a Type 65 project for sale.

The Type 65 has been professionally built and comes with the following:

- Powerder Coated Frame
- All components powder coated before installation
- all new components, nothing was used or reused
- Custom Built 302 350 HP Ford Crate Engine with Stack Induction by Pro-Formance Unlimited out of New Jersey.
- New TKO 600 Tremac Transmission (manual)
- 12.875 31 Spline drive shaft
- 8.8 3 Link Rear Axle Housing on Axle
- 11.65 Rear Brake Set
- No Perch Rear Lower Control Arms
- Front Tubular Lower Control Arms
- Roaster / Coupe Solid Axle Coil Over Kit
- Wilwood Brake and Clutch Set
- Kirkey seats
- vintage Air
- 302 Headers - wrapped with heat fabric
- Halibrand Replica Wheels with new rubber
- removable steering wheel.
- heat insulation installed.
- professionally Painted

It runs and drives and is nearly complete. It still needs the following to complete, interior carpet, dash cover, door handles, rear windows and front and rear windows installed, alignment, carburetor need to be synced and tuned. I have all the parts to complete it.

Asking $35,000 US obo

http://i68.tinypic.com/107jha0.jpg
http://i68.tinypic.com/sob77s.jpg
http://i66.tinypic.com/ejbk08.jpg
http://i68.tinypic.com/29gh26h.jpg
http://i64.tinypic.com/34yscwk.jpg
http://i67.tinypic.com/2vunf9v.jpg
http://i67.tinypic.com/v4phle.jpg

[John Dol]

Unless you need the money, talk to Mark Dougherty, Mike Everson, or Jeff Kleiner to finish it for you. Your sooooooo close!!!!
Gotta love that 8 stack

GLWS

John

[JL1958]

Where are you located?

[Redmantice]

The car is located in Cold Lake, Alberta, Canada.

[Mark Dougherty]

nice build

[Redmantice]

Here is a video of the Type 65 running. This engine came from performance unlimited and the carbs have not been tuned or synchronized.

https://youtu.be/r-wH_Sqwi_E

If anyone is interested in looking at the engine build sheet please send me your email and I will send it to you.

[Clover]

Wow, this seems like a heck of a deal. Sure looks nice to me and after buying a lot of these parts myself, I know there is great value here for someone. Not sure of your situation, but it seems like it would make sense financially to have the kit finished and then sell it. I would think you could pay someone to finish it off and then sell it for a good bit more but maybe that just does not work at this time for you. I hope you enjoyed the build and have something else fun on the horizon.

[Francky]

Geez, can somebody buy this car already so I stop thinking about it!

[RyanP]

Is this car really still available?

[Redmantice]

Yes it is for sale. There have been a number of inquiries but no takers at this point.
Regards,

Jay

[Redmantice]

I have had a number of people privately e-mail me asking if I would sell for your $25,000 or lower. Although I respect the concept of a free market, I wanted to let people know not to waste their time. I am currently building an Vans RV10 experimental aircraft which is taking up all of my time. The Coupe is for sale because I have lost interest, not because I need the money. I will entertain offers in the range of $35,000 which is less than 1/2 of cost to build this Coupe. Thank you for your consideration.
Regards,
Jay

[WIS89]

Jay-

I think getting your car at your asking price is an absolute steal! If I had the money, and my wife wouldn't kill me, I would be at your place with a trailer in a minute!

I am sorry that you have to sell it, but someone is going to get a terrific car at an amazing price!!

Good luck with the sale; frankly, I am shocked that someone hasn't snatched it up already!

And good luck with your aircraft build! I know this is a Factory Five forum, but I would love to see pictures of your project.

All the best!

Regards,

Steve

[bsnyder]

PM sent.

[John Dol]

Jay-

I think getting your car at your asking price is an absolute steal! If I had the money, and my wife wouldn't kill me, I would be at your place with a trailer in a minute!

Good luck with the sale; frankly, I am shocked that someone hasn't snatched it up already!

I feel the same way. I'm almost done with mine but would love to snatch it up. The wife part is the biggest scare! LOL

Somebody buy this already so I can stop thinking about it.

GLWS

John

PS and $25K is a slap in the face, common people know what your bidding on.

[Redmantice]

This Coupe is sold pending funds....

Thank you everyone for your support. I’m now officially down to one FFR (33 Hot Rod) and my Vans RV10 project.
http://i64.tinypic.com/2e3ab9f.jpg
http://i68.tinypic.com/f53inl.jpg

[mburger]

Love the RV10!

[BrandonAZCobra]

PM Sent

[snowdave]

Glad this is sold. My son has been trying to convince me the coupe is a better option than the roadster and cost is one of the reasons I give him for sticking with our roadster plans. This is/was one heck of a deal!

[Redmantice]

UPDATE: THE COUPE IS BACK IN THE MARKET.

The previous buyer unceremoniously backed out.

If you have any questions, please let me know.

Regards,

Jay

[SeanP]

What would be involved in getting it into US? Could someone just load it into a trailer and drive it back across the border?

[Redmantice]

I’m getting a lot of questions on the paperwork. It has been started. I have the Manufacturers Certificate of Origin and the VIN number. It is registered as a Factory Five 1965 Replica.

Regards,

Jay

[soreknuckles]

UPDATE: THE COUPE IS BACK IN THE MARKET.

The previous buyer unceremoniously backed out.

If you have any questions, please let me know.

Regards,

Jay

I may have missed this, but is it Gen 2, or Gen 3? Thanks.

[Redmantice]

This is a Gen 1 kit.

[RyanP]

Serious question, anyone have any suggestions on transporting something like this to the US? It would be a 5000 mile, 75 hour round trip drive to the southeast where i live which just wouldn't be practical. Not having an active passport doesn't help either. I sure would be interested, just have no idea how I would get it. Anyone ever brought an incomplete kit over from Canada before?

[John Dol]

Serious question, anyone have any suggestions on transporting something like this to the US? It would be a 5000 mile, 75 hour round trip drive to the southeast where i live which just wouldn't be practical. Not having an active passport doesn't help either. I sure would be interested, just have no idea how I would get it. Anyone ever brought an incomplete kit over from Canada before?

Contact a car shipping company. Cost me about $1,600 to ship East to West coast.


Good luck,


John

[Zots]

Hmmmm.....
https://www.epa.gov/importing-vehicles-and-engines/kit-car-policy

[Redmantice]

The Daytona is still for sale.

For a limited time I am prepared to include the 24’ x 8’ Hallmark Car Hauler that is pictured in the video link above for the original listed price of $35,000 US firm. I need to make room for my other toys.

First non refundable $1,000 deposit takes it.

Jay

[WIS89]

The Daytona is still for sale.

For a limited time I am prepared to include the 24’ x 8’ Hallmark Car Hauler that is pictured in the video link above for the original listed price of $35,000 US firm. I need to make room for my other toys.

First non refundable $1,000 deposit takes it.

Jay

Jay-

You are killing me!!! This is an insane deal.

You know, I could store it for you, take very good care of it, and send you periodic pictures of me "test driving," yeah that's it "test driving" it for you, until you wanted it back.

Somebody is going to get an amazing deal on a beautiful car!! Good luck with the sale Jay.

Regards,

Steve

[Redmantice]

The car is sold for sure this time.
Cheers.
Jay

[John Dol]

Congrats!

John