Rev limiter for pertronix

[Murd]

Thinking I should probably add a rev limiter. I’m running a pertronix ignitor 2 distributor. Any thoughts on whether I should just get the pertronix rev limiter 600, which is an external box, or I believe I can change it to an ignitor 3 that has a rev limiter built in.
Other better options?

Interested to hear everyone’s thoughts.

[frankb]

I run the Ignitor III and am happy with it. The rev limiter is pretty accurate :)

[Avalanche325]

I run the Ignitor III and am happy with it. The rev limiter is pretty accurate :)

Same for me. The igniter III works great.

I would do the module and keep it all simple and clean.

If you plan to autocross, change "probably" to "definitely".

[d_gatorfan]

I swapped the module in my igniter II to an igniter III to get the rev limiter. Pretty easy.

Dennis

[Murd]

Thanks all. Agreed changing to an Ig 3 module is the cleanest setup. I’ll work on that.
Thanks again

[mike223]

If you plan to autocross, change "probably" to "definitely".




I would never throw heavy throttle to one of these cars without a rev limiter.

If the engine's working "right" you can easily slip traction and bump the rev limiter faster than you can get your foot back off the throttle.

[Murd]

Thinking of trying an autocross this season, that’s what got me thinking about it

[scottiec]

Sorry to revive this. But Murd what did you end up going with and how do you like it. I am in the same predicament.

[Murd]

I bought an igniter 3 to upgrade mine but have yet to install it.

[scottiec]

Ah thanks for the heads up