Aero STI
03-04-2019, 10:17 PM
I built the Chippernut V3.1 shift light this past Sunday. https://www.chippernut.com/store/p25/DIY_Shift_Light_Kit_%28Unassembled%29_v3.1.html#/
It's available preassembled if you're not into soldering.
My 6 year old installed most of the components. She has the hands of a surgeon and did the majority of the soldering. My 3 year old trimmed the excess on the pins. I've been burning it in on my bench using the code for an RPM simulator on their website. It's been operating for over 24 hours without any issues.
https://i.imgur.com/ulpL3Pyh.jpg
I would highly recommend the kit!
https://i.imgur.com/ZmIRj3C.gif
It's available preassembled if you're not into soldering.
My 6 year old installed most of the components. She has the hands of a surgeon and did the majority of the soldering. My 3 year old trimmed the excess on the pins. I've been burning it in on my bench using the code for an RPM simulator on their website. It's been operating for over 24 hours without any issues.
https://i.imgur.com/ulpL3Pyh.jpg
I would highly recommend the kit!
https://i.imgur.com/ZmIRj3C.gif