Coyote Cooling Expantion Tank Height

[mlewis]

All,

Just completed the install of the cooling expansion tank (Moroso). I followed previous input received to line the tank mounting tab up vertically to the bottom edge of the cross member.

Here's a side shot:

102729

102730

Let me know if my height looks OK with respect to the side rails and/or if these are a couple measurements I can take to assure eventual clearance w/ the hood.

Thanks

[edwardb]

That's exactly where I mounted mine. I might even have been the one to give that suggestion before. Mounting brackets on the underside of the cross member and lower mount on the radiator shroud. It clears the hood fine.

http://i867.photobucket.com/albums/ab234/edwardb123/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Coyote%20Engine/th_IMG_3708_zpsmfo7d5dm.jpg (http://s867.photobucket.com/user/edwardb123/media/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Coyote%20Engine/IMG_3708_zpsmfo7d5dm.jpg.html)

https://i867.photobucket.com/albums/ab234/edwardb123/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Coyote%20Engine/th_IMG_3723_zpskvevrhmp.jpg (https://s867.photobucket.com/user/edwardb123/media/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Coyote%20Engine/IMG_3723_zpskvevrhmp.jpg.html)

[BEAR-AvHistory]

Just a thought. There are two COYOTE tanks from MOROSO & they mount slightly differently.

https://thefactoryfiveforum.com/attachment.php?attachmentid=102757&d=1551110543

[mlewis]

That's exactly where I mounted mine. I might even have been the one to give that suggestion before. Mounting brackets on the underside of the cross member and lower mount on the radiator shroud. It clears the hood fine.

Paul, you absolutely did. Now that I have it installed, was looking for confirmation.


There are two COYOTE tanks from MOROSO & they mount slightly differently

I opted for the Moroso 63806 (same as Paul's)

102786

Stay tuned as I have a couple of hose connection questions :)