Wiring routing for electric. PS

[rponfick]

I will be looking for alternate PS wire routing than that shown on page 146 of the assembly manual. The manual shows routing outside the 1.5” firewall support. I just ripped mine to shreds test fitting the cab. I am working by myself using a lift to drop/lift the cab. Maybe, if you have multiple helpers pulling the sides out you could make it work, but that is not always convenient.
The brake lines, also mounted there, are strong enough to withstand the abuse, but not wiring.
Just my experience.
Ralph

[Marv]

Here are pictures of mine,wiring harness is the smaller of the two.

[rponfick]

Marv, thanks. I will probably go someplace similar, when I get the body back off.
Ralph

[herb fraser]

I cant post a pic as I am out of town , however I spliced wire to extend them and mounted the unit going through the firewall , inside under the dash, This will of course keep it out of the weather and hopefully extend its life.
Herb

[Robodent]

I also extended the wires and fabricated a mounting plate and installed the module under the dash.