PDA

View Full Version : Edelbrock 351 SBF EFI Manifold and Main Cap Girdle



i.e.427
01-20-2019, 06:27 PM
Bought this EFI manifold used for our Ford Maverick project we were going to run Magasquirt with and are now going another route. Just as we bought it with the fuel rail. This is just the manifold and fuel rails. Also for the same project we got a Canton main cap girdle for the bottom end. We'd Like to get $100 for each of these, and we'll include the shipping for the lower 48. Again, sorry, no shipping outside of the cont. U.S.

https://farm8.staticflickr.com/7859/46819497561_d8d93e4d34_k.jpg (https://flic.kr/p/2ekhasz)20190117_173426 (https://flic.kr/p/2ekhasz) by i.e.427 (https://www.flickr.com/photos/152631091@N02/), on Flickr

https://farm5.staticflickr.com/4898/46094317544_ad0a0ae25f_k.jpg (https://flic.kr/p/2decqGQ)20190117_173516 (https://flic.kr/p/2decqGQ) by i.e.427 (https://www.flickr.com/photos/152631091@N02/), on Flickr

https://farm5.staticflickr.com/4847/32943685118_6d5d9658e5_k.jpg (https://flic.kr/p/Sc7ZR1)20190117_173742 (https://flic.kr/p/Sc7ZR1) by i.e.427 (https://www.flickr.com/photos/152631091@N02/), on Flickr

Jsf74
01-20-2019, 06:43 PM
delete

Jsf74
01-20-2019, 06:50 PM
delete

TxMike64
05-16-2020, 08:39 PM
Has the intake been sold?