View Full Version : Recommended routing of Forte clutch hose
miller7448
01-05-2019, 09:40 AM
I received my master cylinder from Mike for the hydraulic clutch. Hose seems relatively short, requiring some fairly optimal routing. Anyone have pictures of how they routed theirs? Thanks.
phileas_fogg
01-05-2019, 10:45 AM
I used a 90* fitting out of the master, ran the hose along the 2" frame (secured it there with a rubberized R clamp), then punched through the foot box side under the mechanical linkage (grommet on the hole). From there it just drops down to the slave.
John
https://farm5.staticflickr.com/4303/36248783266_f3f7eddd61_z.jpg (https://flic.kr/p/XebunQ)IMG_2756 (https://flic.kr/p/XebunQ) by jhsitton (https://www.flickr.com/photos/91016165@N07/), on Flickr
edwardb
01-05-2019, 10:52 AM
Similar routing here. Out of the MC, along the 2-inch tube, then out the footbox wall down to the slave. I use same hole in the footbox side as typically used to bring the rear harness into the cockpit. The alignment is just right.
miller7448
01-05-2019, 05:31 PM
Similar routing here. Out of the MC, along the 2-inch tube, then out the footbox wall down to the slave. I use same hole in the footbox side as typically used to bring the rear harness into the cockpit. The alignment is just right.
Perfect, thanks guys!