help covering dash

[ddm52]

I have researched covering the dash panel. I am using FFR supplied vinyl. I have a MKII and using mustang gauges. Do I glue the complete dash or will it work to do the just the perimeter? Can I glue the bottom edge and do top edge later? What do I use to hold bezels?
Any and all advice welcome. Thanks. Duane

[riptide motorsport]

are you using foam on your dash? Either way glue on everything, everywhere. Just the perimiter will never cut it. you can finish one edge and finish another at a later time. Bezels usually fit snug and hold themselves, but there is mounting hardware that goes on the back of the gauges to hold them in place.......HTH.....Steven

[Todd Buttrick]

I bought vinyl from Joanne Fabrics that had a nice leather grain imprint to cover my dash with a thin headliner foam behind it. The 3M spray adhesive I used bled though so I only did the perimeter. 10 Years and 80K miles and it looks as good as the day I installed it. No wrinkles and no bubbles.

[oldguy668]

When I did mine with the FFR OEM covering, I totally botched the job. I went to Joanne Fabrics and bought the same stuff Todd got and laid it right over the original. All is well.