Forte Hydro CLutch set up

[magicmarto]

Guys,

Just assembled the transmission and motor. 5.0 coyote, TKO600 and steel quick time bellhousing.
Take a look at these photos. Does this seem correct? Doesn't seem to have enough room to get it to fit or function.

Do I need to disassemble the transmission and Bellhousing to readjust the pivot ball?

Thanks in advance for your input and thoughts.
Martin



988579885898859

[magicmarto]

PS, I know the Aluminum spacers are not in the photo, but is the clutch fork to far to the rear of the car. Its about 1/16" away from the back of the bellhousing.

[edwardb]

Something is way off. Either the pivot, or maybe the TOB isn't on the arm correctly? You want it tipped toward the back slightly, but there should be a decent gap behind the arm. Like this picture I sent in a PM. Same exact parts.

https://i867.photobucket.com/albums/ab234/edwardb123/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Coyote%20Engine/IMG_4308_zpsbs6rkvtm.jpg (https://s867.photobucket.com/user/edwardb123/media/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Coyote%20Engine/IMG_4308_zpsbs6rkvtm.jpg.html)