Hood Hinge Hardware

[timmil]

Ok, So I removed the hood to remove the engine. Put the engine back in and for the life of me now I cannot find the little bag that had the shoulder bolts, washers, spacers and nylok nuts. Does anyone know or have a parts breakdown of the hood hinge kit so that I can order the correct hardware? Or if you know where I can get a set that works too!

Thanks!

- Tim

[Brian Z]

Tim,

Here is a part list for the Mk4 hood hinge.

15131 HOOD HINGE ASSEMBLY
15037 HOOD HINGE LASER CUT STEEL PARTS EA 1.00 HOOD HINGE, LASER CUT PARTS, STEEL
13452 ARM SUPPORT PLATE, DRIVER EA 1.00 SHEET, STEEL, HRPO, 1/8"
13520 ARM SUPPORT PLATE, PASSENGER EA 1.00 SHEET, STEEL, HRPO, 1/8"
15038 ARM SUPPORT PLATE, UNBENT EA 2.00 SHEET, STEEL, HRPO, 1/8"
13946 HOOD MOUNT PLATE EA 2.00 SHEET, STEEL, HRPO, 1/8"
13451 DRIVER FRAME ADJUSTMENT PLATE EA 1.00 SHEET, STEEL, HRPO, 7 GA
14006 PASSENGER FRAME ADJUSTMENT PLATE EA 1.00 SHEET, STEEL, HRPO, 7 GA
15036 FRAME ADJUSTMENT PLATE, UNBENT EA 2.00 SHEET, STEEL, HRPO, 7 GA
15040 HOOD HINGE LASER CUT ALUMINUM PARTS EA 1.00 HOOD HINGE, LASER CUT PARTS, ALUMINUM
15143 LONG ARM, DRIVER EA 1.00 SHEET, ALUMINUM, 5052-H32, CUT, 0.190"
15144 LONG ARM, PASSENGER EA 1.00 SHEET, ALUMINUM, 5052-H32, CUT, 0.190"
15145 LONG ARM, UNBENT EA 2.00 SHEET, ALUMINUM, 5052-H32, CUT, 0.190"
25410 SHORT ARM EA 2.00 SHEET, ALUMINUM, 5052-H32, CUT, 0.190"
14007 GAS STRUT EA 2.00 SPRING, GAS, 20#, 19.7" EXT., 11.8" COMP., W/10MM PLASTIC BALL SOCKET FITTINGS
13469 THREADED BALL STUDS EA 2.00 STUD, BALL, 10MM, 5/16-18x.625" THREADS
13325 SHOULDER BOLT EA 8.00 SCREW, SHOULDER, SOCKET HEAD, STEEL, 3/8" SHOULDER x 0.50", 5/16"-18
25562 5/16"x 3/4" CARRIAGE BOLT EA 8.00 SCREW, CARRIAGE, ZINC, 5/16"-18 x 3/4", GRADE 5
11005 5/16" WASHER EA 16.00 WASHER, FLAT, USS, ZINC, 5/16"
13963 5/16"-18 NYLON LOCK NUT EA 18.00 LOCK NUT, NYLON, GRADE 8, ZINC, 5/16"-18
15275 1/2" SHIM, LARGE OD EA 8.00 SHIM, STEEL, 1020, 1/2" ID x 7/8" OD x 0.075" THK, ZINC
13183 HINGE BUSHING EA 8.00 BUSHING, OIL IMPREGNATED SAE 841 BRONZE, FLANGED, .377" ID x1/2" OD x 1/4"LG
25799 RIVETS, 3/16", SHORT EA 10.00 RIVETS, ALUMINUM/ALUMINUM, 3/16" OD, 0.063"- 0.125" GRIP, BAGGED AND LABELED "FFR# 25799, 3/16" RIVETS, 0.063"- 0.125" GRIP, 20 EA"
13972 GAS STRUT BRACKET, 90 DEGREE BENT, SHORT EA 2.00 BRACKET, 90 DEGREE BENT, 10MM x 0.625" STUD, 3 MOUNT HOLE, 12 GA., 0.50" HIGH STUD
11295 HOOD HINGE INSTRUCTIONS EA 1.00 INSTRUCTIONS, HOOD HINGE