Steering wheel hub bolt pattern

[P100DHG]

I cancelled the steering wheel that came with my kit. I am looking to buy one I prefer more, what is the bolt pattern here called? What should I be looking for?

http://www.factoryfiveparts.com/12525-steering-wheel-boss/

[michael everson]

Pretty sure its FFR specific. It is not a consistent bolt circle either.You may be able to drill the hub to match whatever you buy though.
Mike

[Papa]

You might send a note to Russ Thompson, as he does custom machining on the steering wheel boss for his turn signal setup. He may be able to provide the specs and offer recommendations on what would fit.

[P100DHG]

Is the steering rack universal that I can just use a boss that comes with steering wheel like this

https://www.ebay.com/itm/65-1969-Ford-Mustang-Steering-Wheel-Mahogany-Wood-w-rivets-and-Billet-Spokes-14/201470919238?_trkparms=aid%3D111001%26algo%3DREC.S EED%26ao%3D1%26asc%3D20160908105057%26meid%3D2c79f b384f16413a9c04d1445b4903cd%26pid%3D100675%26rk%3D 2%26rkt%3D15%26mehot%3Dlo%26sd%3D131792757937%26it m%3D201470919238&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3A4571ca70-f008-11e8-9ae9-74dbd180f0a9%7Cparentrq%3A469c1b1d1670aadc1a0142df fff008b6%7Ciid%3A1

Another example

https://www.ebay.com/itm/1978-to-1991-Ford-Bronco-Real-Wood-Billet-Steering-Wheel-Full-Install-Kit/191877507216?_trkparms=aid%3D111001%26algo%3DREC.S EED%26ao%3D1%26asc%3D20160908105057%26meid%3D2c79f b384f16413a9c04d1445b4903cd%26pid%3D100675%26rk%3D 6%26rkt%3D15%26sd%3D131792757937%26itm%3D191877507 216&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3A4571ca70-f008-11e8-9ae9-74dbd180f0a9%7Cparentrq%3A469c1b1d1670aadc1a0142df fff008b6%7Ciid%3A1

[GoDadGo]

If you want a different wheel then you may want to install a Quick Disconnect like one of the types shown below since they have multiple patterns:

https://www.jegs.com/p/JEGS/JEGS-Quick-Release-Steering-Hubs/758026/10002/-1

Also, check out this earlier forum thread if you want to see other solutions:

https://thefactoryfiveforum.com/showthread.php?27052-Show-us-your-steering-wheels&highlight=jegs+quick+release

You just need to have the wheel spline Tig Welded to the 3/4" shaft.

[P100DHG]

Just to give resolution to this thread, I’m sending out my boss to Russ Thompson he has the Momo bolt pattern.