PDA

View Full Version : Body fit question



cfriedman67
10-28-2018, 08:34 AM
I have the body on with the bulb seal on. Do many people need to trim the rear cockpit wall? As you can see the bulb seal sticks out below the body?. It’s worse on the passenger side. I did also install the quick jacks and that has not helped.

Thanks

Vspeeds
10-28-2018, 08:46 AM
Im not at that point yet in my buid yet. However, i think it is recomended to not put bulb seal at that locaation just for that reason.

cfriedman67
10-28-2018, 08:51 AM
Without the bulb seal the body has pretty even spacing against the rear cockpit wall. I’m curious if as you add the trunk, hood, splash gaurds etc... does that help with the fit in other areas.

Murd
10-28-2018, 08:57 AM
Build seal does not go on the rear cockpit wall between the trunk walls. Do a search you’ll find plenty of info and pics. Leave it on the rear wall from the trunk side walls down to the door latches, take off the middle section between the trunk walls.

cfriedman67
10-28-2018, 08:59 AM
Thank you both!!