View Full Version : Fuel Line Fittings
BadAsp427
10-16-2018, 06:29 PM
Ok... What fitting do I need and where can I find it?
The BluePrint Engines Holley Carb came with the fuel line as seen in this photo. I'm not sure of sizes, but I believe this is an AN6 ??? I have installed the 5/16 hard fuel line that comes from FF. What I'm trying to find is the adapter that will come off of the 5/16 Hard Line and allow me to connect the braided hose to it. Ideally with a 90* elbow at the same time. (but I wont be picky) Can anyone help me?
95722 95723
edwardb
10-16-2018, 06:45 PM
If it's 5/16 inverted flare, that's a 1/2-20 thread. If your flex line is AN6, then this adapter will hook you up. https://www.summitracing.com/parts/rus-640600/overview/. Don't see anything in that combination that's 90 degrees.
BadAsp427
10-16-2018, 06:45 PM
I FOUND THIS. (https://www.summitracing.com/parts/rus-640600/applications). Is this what I need???
BadAsp427
10-16-2018, 06:50 PM
If it's 5/16 inverted flare, that's a 1/2-20 thread. If your flex line is AN6, then this adapter will hook you up. https://www.summitracing.com/parts/rus-640600/overview/. Don't see anything in that combination that's 90 degrees.
Yup, I found it about the same time as you sent this... THANKS Paul...
BadAsp427
10-16-2018, 07:11 PM
Ok, all cleared up... just ordered both Russell 640600 and Russell 614806 Blue Anodized Aluminum 90-Degree Female -6AN to Male -6AN Adapter Fitting. Put those two together and I'll have a nice hook up for the fuel system.
cv2065
10-16-2018, 07:24 PM
Ok... What fitting do I need and where can I find it?
The BluePrint Engines Holley Carb came with the fuel line as seen in this photo. I'm not sure of sizes, but I believe this is an AN6 ??? I have installed the 5/16 hard fuel line that comes from FF. What I'm trying to find is the adapter that will come off of the 5/16 Hard Line and allow me to connect the braided hose to it. Ideally with a 90* elbow at the same time. (but I wont be picky) Can anyone help me?
95722 95723
Sparkly shiny...:) Can't wait to get mine!
FLPBFoot
10-18-2018, 05:40 PM
Ok... What fitting do I need and where can I find it?
The BluePrint Engines Holley Carb came with the fuel line as seen in this photo. I'm not sure of sizes, but I believe this is an AN6 ??? I have installed the 5/16 hard fuel line that comes from FF. What I'm trying to find is the adapter that will come off of the 5/16 Hard Line and allow me to connect the braided hose to it. Ideally with a 90* elbow at the same time. (but I wont be picky) Can anyone help me?
95722 95723
Is that a Blue Print 427? My carb model has the fuel line on the passenger side and looks like this.
95791
BadAsp427
10-18-2018, 06:51 PM
Is that a Blue Print 427? My carb model has the fuel line on the passenger side and looks like this.
95791
Close... it is a BluePrint 347 and the fuel line is on the DS.... but it is 427ft/lb of torque... so I'm calling it a 427... :cool:
cv2065
10-18-2018, 07:01 PM
Close... it is a BluePrint 347 and the fuel line is on the DS.... but it is 427ft/lb of torque... so I'm calling it a 427... :cool:
You go Carl! I want to hear that first startup pronto!!
FLPBFoot
10-18-2018, 09:07 PM
Close... it is a BluePrint 347 and the fuel line is on the DS.... but it is 427ft/lb of torque... so I'm calling it a 427... :cool:
Ah. Got it. A 650 Holley?
They are nice engines!
Steve