View Full Version : Koni adjustment
Sigurd
10-09-2018, 06:01 AM
What initial adjustment do people use for the basic Konis?
I am preparing for a new work session on the type 65. All the suspension parts have arrived. I would like to have a shocks adjusted before I install them. 347 Ford with IRS. I understad they are supplied adjusted to the softest position.
Jeff Kleiner
10-09-2018, 06:57 AM
What initial adjustment do people use for the basic Konis?
I understad they are supplied adjusted to the softest position.
Not necessarily. Although they are usually on the soft rebound setting out of the box I have found some that are not so you are wise to check them. My experiences are with Roadsters running 3 link so may not be the same as your IRS Coupe but with those when using the factory spring rates I set the front to soft and the rear to one click up from soft (they're a little bouncy in back on full soft in my opinion).
Jeff
Mark Dougherty
10-09-2018, 10:01 AM
New irs or old
New IRS do as Jeff stated
Old IRS full stiff
Fronts leave at full soft
Sigurd
10-09-2018, 12:09 PM
New irs or old
New IRS do as Jeff stated
Old IRS full stiff
Fronts leave at full soft
New IRS. Rear: one click up; front: soft.
Thank you gentlemen!