View Full Version : Another Axle Question
Cobra Ray
07-03-2018, 04:08 PM
On the 2007 axle, there are two brackets on each end of the axle.
I am assuming that the pan hard bar and the control arms attach to the inboard brackets and I can lop off the two outboard brackets?
Am I correct in my assumption?
Thanks in advance.
Ray
herb fraser
07-08-2018, 10:28 PM
not sure but I think you have the wrong rear end , should only have one braket on the center
ask tom Wallace and he will let you know for sure , Herb
Cobra Ray
07-09-2018, 07:40 AM
Herb,
You are right. Went to install a new rear cover, which did not fit. I have a 7.5 rear end, not an 8.8.����
herb fraser
07-09-2018, 09:51 PM
time to sell it to someone building a mark 4
Has anyone found stainless steel hoses for the stock calipers on these rear ends.
TDSapp
07-18-2018, 09:56 AM
Has anyone found stainless steel hoses for the stock calipers on these rear ends.
Are you talking about something like this?
http://www.breezeautomotive.com/details.php?prod_id=593&cat_id=1