Pedal Box Modification

[Stillwater35]

Good morning team truck builders,
I made some progress on my truck but as I moved on to the pedal box - I found that the new design for the chassis support won't allow the far-right master cylinder to go in properly. On the 33 - they have a much narrower design that allows for the MC to go in just fine. I have attached a picture or 2 of the issued. I e-mailed FFR and wanted to confirm that I am going to have to notch out the support to get the pedal box in there.

Wallace did his own MC so he wouldn't have run in to this. Erik doesn't seem to have gotten to this point with his truck (as far as I can tell). Has anyone else run in to this and did you notch out the frame?

Thanks,
Jeff
8770987710

[Stillwater35]

You can see the difference in chassis design with this picture pretty well.

https://thefactoryfiveforum.com/attachment.php?attachmentid=82832&d=1519597999

[Marv]

Tony at FFR said to mount the pedal bracket on top of the pedal box frame, no notching required.

[Stillwater35]

Yup, he replied to me the same way and I tried it and it works. No notching required.