5mm fuel pump bolts

[Dkelly]

I’m dedrick from Houston building my first ffr 818c. I can not locate the 5mm bolts that FFR says is included. My question: can anyone give me more information on these bolts do I can go out and buy some to keep my build moving?

Thanks in advance

[lsfourwheeler]

I’m dedrick from Houston building my first ffr 818c. I can not locate the 5mm bolts that FFR says is included. My question: can anyone give me more information on these bolts do I can go out and buy some to keep my build moving?

Thanks in advance

FFR uses different bolts than the Subaru fuel pump bolts?

[Dkelly]

My donor used nuts. The studs are part of the honor tank. The documentation identifies 5mm bolts that are supplied but I have not located them.

[phil1734]

Assuming you're talking about the ones that go around the flanges on top of the tank, they came in a small bag attached to the FFR fuel tank if I recall correctly. They were not in the pre-packaged nuts and bolts.

They are very small silver flange heads, and it's quite possible they fell off somewhere between the fuel tank manufacturer, factory five and your garage.

[Dkelly]

Extremely helpful response. I'll follow up with Factory Five and I have looked all over the box the tank came in and assumed I overlooked them in the fastener box.

Thanks again Phil1734

[wirenut]

I couldn't find them with my kit either.

I ended up bailing and ordering a Boyd tank so it didn't matter to me in the end.

[turbomacncheese]

Mine were inside the tank, I believe...

[Dkelly]

I did not look inside. David from FFR sent me the specs. I bought them today and ready to install the tank now.

[Dkelly]

Just so it’s out there the bolts are: 5m-0.8 x 10mm