MK4 Wilwood Master Cylinder Fitting Question

[lewma]

All

The Wilwood Master Cylinders on my MK4 each require a 90deg fitting that I believe is a 1/8-24 NPT to -4 90 deg fitting. The Wilwood part number on the instruction sheet is 220-0842.

I need to buy a couple of these fittings as I've already messed one up. Does anyone know where I can get one from ? That Wilwood part# doesn't seem to line up.

thanks!
mark

[boat737]

ANPlumbing.com (it's Earl's Plumbing). Check your AN- though. I'm pretty sure mine are -03, not positive. Here's the stainless one's. They have aluminum or zinc too I think. https://www.anplumbing.com/adapters/a-n-stainless-adapters.html. The tabs at the top of the groups swaps between Earl's and ANPlumbing (and if available, XRP) parts.

[edwardb]

Those fittings are 3/8-24 inch inverted flare (brake line side) x 1/8-27 inch NPT (MC side). I'm not sure they're Wilwood parts. I think they're these: https://www.summitracing.com/parts/aaf-all50125/overview/. Wilwood has a straight version, 220-0628, that I actually prefer. Just depends on how you route your lines.

[lewma]

Thanks all!!