Northern CA Builds/Completes/Gathering...?

[TheBabyBadger]

Hey guys-

A couple of you may have bumped into me already, but I'm just out fishing for a good Nor Cal car group! Down to hang, BBQ, go to the lake (we have a boat), talk shop, whatever. If you have a COMPLETE car (especially a Type 65) I'd love to ride in one, and obviously anyone else in the area it would be nice to network with as well. My wife and I live in Vacaville, CA and I run a large collision facility out of Napa, CA. If you have a car meet, especially kit related, I'd love to hear about it. Once my car is done I will do my best to get it out on the street as often as possible!

Hope everyone is doing well, and having a happy hump day!

Here's a link to my build:

Brian's Northern CA Type 65 Coupe Build (https://thefactoryfiveforum.com/showthread.php?27372-Brian-s-Northern-CA-Gen-3-Coupe-Build)

[TheBabyBadger]

REALLY? No one in NorCal? Yikes...

[Vspeeds]

Brien
I'm still (slowly)building my car. I'm in Elk Grove.

[BB767]

Hi Brian,

I am here, as my avatar says, up by Placerville. Have been watching yours, and all the other builds here in NorCal and elsewhere. Have not piped up because not much to say. My Roadster was painted today up at Ken's in Yuba City. Will attempt to attach photos.
88701
I would love to have an excuse to get the car out once it is done, meeting up with other locals would be great. Eddie (Vspeeds) and I have been in touch. It would be an awesome sight if we get together with his 289, my 427, and your Type 65! It will happen someday. Anyway, keep at it and keep in touch as we all get closer to finished cars.

88702

Brien

[1932]

Maybe, i am just about to take my 33 out of shop-in primer. build is toms33.

[Rsnake]

Hello Brian,

I am in Half Moon Bay and would be interested in a get together. I have had mine a little over two months and getting close to the first start, hopefully later this week. So maybe in a few more months it might be on the road if all goes well and we can set something up.

[Just puttering]

Howdy from sac. Working on computer so no driving right now but some get togethers would be great

Also, i know i saw the first thread and didnt have time to respond, then it dropped of the list and i forgot about it. Sorry!

[Tuftster]

I'm in Livermore, also with a Gen 3 Coupe, delivered last November and slowly moving along.

[norcalLo]

Hey Gang, just an FYI - keep an eye on the Bay Area Cobra club posting for the 2018 Snakes-at-the-Lake gathering in September - GREAT group of peeps, fun times and it's at South Shore - don't need your car to attend LOL!!! GREAT venue to network with peeps who know these cars!!!:cool:

[RHelweg]

Hey guys,

I am currently located in Sacramento, originally from Fairfield. I am doing as much research as I can before I order my gen 3 coupe. I hope to order my coupe in the next couple of months as I would like some advice from builders on what I have chosen to do with my coupe. Here is a list of what will be put into the car. Please comment or make suggestions as this will be my first time taking on a project of this magnitude.

Gen 3 Type 65 Coupe - Complete Kit
Added options:
- White powder coated chassis
- Body cutouts
- Front and rear sway bars
- 12.88 Black Willwood upgrade
- IRS
- Upgraded Koni shocks
- Power Steering
- 302 Ceramic Headers
- A/C/Heater
- 2006 Ford GT Gauges
- Pre Cut Carpet
- Front Areo Bumper
- Race Spoiler (Maybe)
- Seats (TBD)
- Wheels (TBD)
- BF Goodrich G-Force Rival S: P275/35ZR-18 for the front, P315/30ZR-18 for the rear. White lettering
- Holley fuel pump and filter assembly

Powertrain:
- Ford Performance 363 C.I.D. BOSS long block (~507hp, 302 block) M-6007-Z2363RT
- Edelbrock Performer RPM Air-Gap Intake 7521(dual plane)
- Holley Sniper EFI w/ hyper spark coil, ignition box, steel distributor.
- RAM Billet Steel fly wheel 1529-15
- Hydraulic conversion kit: McLeod Hydraulic Throwout Bearing Conversion Kits 14-325
- Twin Clutch kit: McLeod RST Street Twin Clutch Kits 6913-07C
- Quick time bell housing
- Transmission: American Powertrain Tremec TKO 600 Manual Transmissions TCET-5008
- Engine will be fully dressed

If any one has cars in the area i would love to come out and learn as much as i can before i invest into this coupe. But Lets be honest im going to buy one either way!

-Rob

[wineguy]

In Vallejo (Mare Island) and used to live in Napa. Planning an MKlV build.

[Dewey McBride]

I'm in Fairfield with my MK4

[dwgcooks]

Fremont building an 818R

[JohnK]

Hello from Los Gatos. Just received my roadster kit last week.

-John

[japollon]

In Petaluma. Just finishing my 289 FIA. My car is at Ken's shop in Yuba City currently being prepped to paint. Joel

[DSR-3]

818S #332 in south San Jose

[bansheekev]

Just saw your post - not sure if you can make it but I'm putting together a gig in the South Bay in a couple weeks.... We are up to about 10 cars I believe right now. Details:


I set this up a couple years back and it’s time for a redo.
Summer is really busy but we have been slacking on getting the Cobras and other toys out on cruises / getting togethers! I am working on fixing that. I'm thinking a back country cruise from Saratoga to Gilroy, a stop at a winery in the Gilroy area, then lunch at my house.

When - Saturday, June 22rd, 2019 11:00am - 4:00pm (or later)
What - Back country cruise from Los Gatos/Saratoga to a winery in the Gilroy area, then lunch at my house in Gilroy

Route:
Start – Safeway parking lot, 12876 Saratoga Sunnyvale Rd, Saratoga, CA 95070 - 11:00am.
Leg 1 – Highway 9 to Los Gatos / Shannon Rd / Hicks Rd over the hill from Los Gatos to Almaden Valley
Leg 2 - Almaden Expressway to McKean Rd south
Leg 3 – Uvas Reservoir To Watsonville Rd & Day Rd to back hillsd Gilroy
Winery – Aver Family Vineyards (Watsonville Rd / Day Rd, Gilroy)
Lunch: - Casa de Kevin, 945 Ferragalli Ct, Gilroy, CA 95020

My neighbors are all gear heads so we are all good. Plenty of parking.

Would love to see a big turnout!

Kevin

[toadster]

I'm in Folsom, still in the planning phase - but would love to check out some rides :)

edit: got my car early Feb - building in process https://cobradreams.com

[crspdsk8]

Hey Guys!! I haven't been on here for a while but definitely would love to get a group together. I built a 33, #600 and live in Antelope, just outside of Sacramento.

I also own a restaurnant in Roseville called Squeeze Burger & do a Cruise ninth on the 1st Thursday of every month. Next one is Thursday Sept 5th from 5-8pm. Would be great to have some other FFR cars there along with mine.

Feel free to message me & I can share my contact info.

[NCAL DESIGN]

I'm in Tracy, looking for a nearby Gen 3 Coupe to see and sit in as well as a mark IV roadster. I am 6' 4" and want to see how well I fit before ordering a kit. I have also read on this forum how there is a different skill level needed to build the coupe and would like to see and ask a builder in person the hurdles they went through to finish a kit.

[Tuftster]

NCAL Design, I'm in Livermore building a Gen III but it's not completed yet, hopefully getting to a first start in the next few weeks. You're more than welcome to come take a look if you want. The only other Gen III somewhat nearby is over in San Mateo, builder is Dave Tabor. The thread originator TheBabyBadger, was building one but sold it, no idea where it ended up.

[NCAL DESIGN]

Tuftster, would love to drop by to see your build. Do you have kirkey or vintage type seats? I know a lot depends on what is selected in the interior as to how a person fits. I was hoping the baby badger might have had a completed car, but things change for everyone.

[Tuftster]

I have the vintage kirky (low back) seats but not installed yet.

[NCAL DESIGN]

I would like to take the opportunity to take a look at your car project. Are you working on it this weekend? My email address is activechiropt@yahoo.com , If I receive your address and time your working on the car, I will stop in to check out. Have a great day.

[NCAL DESIGN]

My email is activechiropt@yahoo.com let me know when your working on your car so I can take you up on your offer to stop by. I am free on weekends mainly.

[NCAL DESIGN]

Let me know when your working on your car and how to find you. My weekends are mostly free.

[Rxbooth]

Hey Guys!! I haven't been on here for a while but definitely would love to get a group together. I built a 33, #600 and live in Antelope, just outside of Sacramento.

I also own a restaurnant in Roseville called Squeeze Burger & do a Cruise ninth on the 1st Thursday of every month. Next one is Thursday Sept 5th from 5-8pm. Would be great to have some other FFR cars there along with mine.

Feel free to message me & I can share my contact info.



I am in antelope as well, I have been planning a build too. A roadster. I would love to see a finished car. I am curious as to what I am getting myself into.

[2FAST4U]

Redding. Super custom very original 289 FIA in work. Almost ready for paint

[crspdsk8]

I am in antelope as well, I have been planning a build too. A roadster. I would love to see a finished car. I am curious as to what I am getting myself into.

Hey there neighbor! I would be more than happy to show you my '33. Just let me know when you would like to. I live just off Poker Lane and Don Julio. Talk to you soon!

[toadster]

bump! this forums needs more <3