EFI Cable Storage / Access

[wisel1]

Hello all. So my EFI is installed and car running. I know that I will be tweaking the EFI settings down the road - Just curious to see what everyone does with the EFI connector cable? I am using the padded dash with the mike everson support plate. Was thinking of just running the cable through a hole under the dash and letting it hang through but that seems sloppy. Has anyone done anything cleaner or more creative?

[stack]

i used the padded dash and after market efi. i decided not to install the back of the glove box. I have the mike everson dash support and it makes a nice big area back there. Just coiled up the cable inside.

stack

[RickP]

I have Mike Everson's under dash filler panel. I ran my cables up through the footbox and back behind the dash and out through a hole in the dash panel. That got me the wire I needed. I then purchased a Ram Mount/Ball and arm cradle gizmo so I can mount the controller up under the dash where I can see real time engine diagnostics.

You can see details in my build thread Post#94.


https://thefactoryfiveforum.com/showthread.php?20239-Ricks-Build-Thread-MK4/page3&highlight=rickp

Here is the end result:


https://thefactoryfiveforum.com/attachment.php?attachmentid=63910&d=1486923782