List of Lubrication Points for Mark IV

[Broadwaydan]

Does anyone have a list of all of the lubrication points on the Mark IV? I should have kept a list as I went along but did not. I have to have a State inspection done and plan to have it lubed at the same time so want to make sure they don't miss anything and I really don't want to have to walk through the manual again to make one.

Thanks.

[DadofThree]

Here's a video that I did for my car showing the zerk fitting locations. Mines a 3.1, but I'll bet they're similar.

I hope this helps, and I hope it's right :)

https://youtu.be/go-yWbqFVKk

[edwardb]

Excellent video. Front should be the same as the video for all. The rear is going to depend on the suspension. The video shows a 3-link which matches yours. Others will have some differences. I personally haven't seen zerks on any driveshafts from Factory Five. But something to check.

[Big Blocker]

20 is the right number for a 3-Link rear ended car - just had mine done today in preparation for the 1K miles I'll put on the car this weekend going to the 11th Huntington Beach Cruise-In.

The count is exactly as Dave video'd (Thanks Dave).

Paul, I had to add the zerks in my driveshaft, not there from the factory during build.

Doc

[Broadwaydan]

Dave,

Thanks for the infor and link to your video. That is what I needed. Car was inspected today and now I am ready to get it back on the road once the weather here in NEPA gets better.