Factory Five 818S For Sale

[axelthrasher]

Hi All,

I recently got into wheel-to-wheel racing, and don't have time for some of my cars unfortunately. My loss is your gain, as I have put a lot of time, money, and effort into this car. This is a fully built, titled, registered car. This has been professionally tuned and aligned. Car makes 240-250WHP on Mustang Dyno (reads lower than a Dynojet). This is a fantastic and fun summer car that gets A LOT of attention. Since completing my rebuild, I have put about 2000 miles on it at the most - enough to work out any bugs/kinks - but not nearly enough to even have any tire wear.

Price: $old!
Location: Saint Charles, IL 60175

http://i.imgur.com/I9NJ047.jpg
http://i.imgur.com/afjGzQi.jpg
http://i.imgur.com/STiyQsL.jpg
http://i.imgur.com/EojT30a.jpg
http://i.imgur.com/bj444se.jpg
http://i.imgur.com/KnK1kar.jpg
http://i.imgur.com/WPm2co1.jpg

Mods:
Enkei RPF1s (17x8 +45 front, 17x9 +35 rear)
215/45R-17 Falken Azenis RT615K+ and 255/40R-17 Falken Azenis RT615K+
5mm Wheel Spacers for Front
Muteki Black SR48 Lug Nuts
FFR Billet Fuel Cap
FFR Harness Bar
OMP Harnesses
OEM WRX Rearview Mirror
NRG Carbon Fiber Shift Knob
Carbon Fiber License Plate Frame
2005-2007 WRX Center Console
2005-2007 WRX E-Brake Handle
Sickspeed Horns
STI Gauge Cluster
STI Gauge Cluster Overlay
STI Steering Joint (Between Column & Rack)
STI Aluminum Front Control Arms
STI Brembos Front and Rear with DBA Discs
STI JDM Spec C Long Runner Intake Manifold
STI JDM V9 Top Mount Intercooler
STI Pink 565cc Fuel Injectors
Forge BPV
New Ball Joints/Inner Tie Rods/Outer Tie Rods
Prosport Halo Gauges (Boost, Oil Pressure, Oil Temp)
Custom Exhaust using bellmouth into 3" inlet/outlet Vibrant Streetpower 1127 Muffler
Grimmspeed Up Pipe
Grimmspeed Cross Over Pipe
Grimmspeed Electronic Boost Control Solenoid
Grimmspeed Black Delrin Oil Cap
Mishimoto Silicone Intercooler Hoses
Mishimoto Silicone Turbo Inlet
Mishimoto Carbon Fiber Radiator Caps (2)
Cobb Silicone Post MAF Hose
Ported Exhaust Manifolds
Ported Throttle Body
Zero Db Steering Rack Upgrade
Whiteline Steering Rack Bushings
Kartboy Battery Tie Down
Fuelab Fuel Filter
Autometer Fuel Pressure Gauge
Donor w/85K miles (new clutch, timing belt, etc.)
FFR Steering Wheel
FFR Carbon Fiber Rear Diffuser
FFR Carbon Fiber Spoiler
FFR Wiper Kit (Removed and holes plugged)
Cobb Intake
Cipher CPA-2001 Seats
Valor ITS-301D Head Unit and Back Up Camera
Polk Audio 5.25" Speakers
Manzo Adjustable Lateral Links
Techna-Fit Stainless Steel Braided Brake Line
Techna-Fit Stainless Steel Braided Clutch Line
Speedway Side Mirrors

Included but not installed:
APR Formula 3 Carbon Fiber Mirrors
FFR Race Carbon Fiber Front Splitter
FFR Carbon Fiber Canards
FFR Carbon Fiber Rocker Panels
FFR Version 1 Fuel Cap
MOMO Floor Plates
Eclipse Vents (Was going to add heat to it)
Assortment of shift knobs
Spare Exhaust
Mishimoto (Tripple Pass - Thicker Core) Radiator
Mishimoto Electric Fans
3 Other Cluster Overlays
OEM Intake Manifold and TGVs
FFR Wiper Kit
OEM Steel WRX Front Control Arms
OEM Intercooler
OEM WRX Gauge Cluster
OEM WRX Calipers and Discs

[axelthrasher]

Bump!

[axelthrasher]

Bump.

[axelthrasher]

Bump.

[Sparkie]

How many miles on the original donor engine?

[axelthrasher]

How many miles on the original donor engine?

86,000 and going up as I still drive it.

[axelthrasher]

Bump.

[axelthrasher]

Bump.

[Tickle]

Any codes being thrown on it? Any cons or issues (it is a great pros list)?

[axelthrasher]

Any codes being thrown on it? Any cons or issues (it is a great pros list)?

No codes, car has been professionally tuned. Any negative aspects I found I corrected as I went, it's a very clean car to be honest.

[Magnum CH]

Please check PM

[axelthrasher]

Please check PM

PMs have been returned.

[Hatfield113]

PMs have been returned.

Please check your PM.

[DARK MERCHANT]

I'm a bit of a noob. Is it possible to covert any of the non C 818s to a C? Would it just be a swap of the paneling?

[Erik W. Treves]

yes you can

[axelthrasher]

I'm a bit of a noob. Is it possible to covert any of the non C 818s to a C? Would it just be a swap of the paneling?


yes you can

Yep - Erik beat me to it...

[turbomacncheese]

AZPete did this. He can give you some insight on the process.

[DARK MERCHANT]

yes you can


AZPete did this. He can give you some insight on the process.


Yep - Erik beat me to it...

Much appreciated on the responses. Checked out AZPete, seems like the conversion is relatively straight forward if you can get the body parts. Been lurking for 3+ years, really want to have a C but no time to build. Would have time to convert a complete car like this though.

[Roy.beckett]

Any idea on 0-60 time?

And does it have a top or is a top available? Im new to this factory five thing

[Mitch Wright]

Can't answer the 0-60 times on this car but I can say these cars are pretty quick. FFR does offer a soft top or the hardtop/coupe conversion that some have done.

[flynntuna]

Road and track has an article on the 818. You can find it in FFR's website. It has specs on 0-60, 1/4 mile times ect.

https://www.factoryfive.com/wp-content/uploads/2014/01/rt-some-assembly-required.pdf

[axelthrasher]

Can't answer the 0-60 times on this car but I can say these cars are pretty quick. FFR does offer a soft top or the hardtop/coupe conversion that some have done.


Road and track has an article on the 818. You can find it in FFR's website. It has specs on 0-60, 1/4 mile times ect.

https://www.factoryfive.com/wp-content/uploads/2014/01/rt-some-assembly-required.pdf

Thanks for answering - I'm not always on the forums... so this general info is great for those that haven't been around the cars.

[42652]

Hi All
Mark here,I'm a newbie to FFR
is the 818 still for sale?

[axelthrasher]

Hi All
Mark here,I'm a newbie to FFR
is the 818 still for sale?

Yea, still have it.

[Mark Reynolds]

That is a very nicely done 818!

[axelthrasher]

That is a very nicely done 818!

Thanks Mark, greatly appreciated.

[jfmnbpt1]

Beautiful car. good luck!

[SSNK4US]

$2,500 bid?? That’s just plain insulting.....:confused:

[Mitch Wright]

Be patent you will get what the car is worth.

[subysouth]

Late to this sale thread - is the car sold sometime in the last 10 days? At an auction? If so where if I might ask to check for one in the future. I check BaT and eBay periodically but this car was not there unless I missed it somehow.

Thanks
ss

[STiPWRD]

Late to this sale thread - is the car sold sometime in the last 10 days? At an auction? If so where if I might ask to check for one in the future. I check BaT and eBay periodically but this car was not there unless I missed it somehow.

Thanks
ss

https://bringatrailer.com/listing/2013-factory-five-818-2/

[subysouth]

https://bringatrailer.com/listing/2013-factory-five-818-2/

Lol, I re-ran my search "818" on BaT and I get 10 auction hits - none of which are this car. 6 are Lancia Fulvias, one RX-7 and 3 actual FF 818s(2 818 and 1 818R.)

I just ran a new search for "Factory Five" and got this car in the list. So the lesson for today on BaT is try harder on your search. No idea why their search engine excluded this 818S and various other 818s.

Someone got a great deal on a very nice car.

ss

[axelthrasher]

Sold my 818s, and one of my WRXs - so parts have to go now:

Parts are located in Saint Charles IL 60175 and prices do not include shipping.

$100 Prova shift knob
$30 MSISUB01-00-030 MSI Power Steering Pump Adapter Kit (Brand New)
$100 Okada Projects Plasma Spark boots
$440 Okada Projects Plasma Direct coil packs
$30 Covert Performance Swirl Pot/Surge Tank (Brand New)
$150 APR Performance Carbon Fiber Formula GT3 Universal Mirrors CB-100004B (Brand New)

$500 Mishimoto X-Line Tripple Pass Radiator and Plug & Play Mishimoto Aluminum Fan Shroud MMFS-WRX-01P & MMRAD-WRX-01X (Both Brand New)

$1000 Factory Five Racing #80844 Gen 1 818 Carbon Fiber Front Canards, #80718 818 Carbon Fiber Front Splitter, #81157 818 Carbon Fiber Rocker Extensions