E Brake/Caliper attachment.

[eamici]

/Users/eamici/Desktop/E Brake.jpg

I hope the attached file is visible. I've got he rear Willwood brake upgrade. I'm having trouble figuring how to attach the cable to the e brake calipers.
In the pic my thumb and forefinger are pointing to the areas that are in question.

[edwardb]

No picture. You can't link a picture directly from your desktop. Have to put it somewhere, e.g. attachment, hosting site, this forum's gallery, etc.

You should have received a Wilwood adapter with your kit. I don't have the best pics, but here are a couple:

http://i867.photobucket.com/albums/ab234/edwardb123/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Brakes/th_IMG_3716_zpsfxavffqz.jpg (http://s867.photobucket.com/user/edwardb123/media/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Brakes/IMG_3716_zpsfxavffqz.jpg.html)

http://i867.photobucket.com/albums/ab234/edwardb123/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Brakes/th_IMG_3732_zpsd0gp60rx.jpg (http://s867.photobucket.com/user/edwardb123/media/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Brakes/IMG_3732_zpsd0gp60rx.jpg.html)

Also shown quite clearly and explained in the IRS instructions. Page 35 has a good pic. http://www.factoryfiveparts.com/content/instructions/15942-2015-irs.pdf

[phileas_fogg]

Not exactly your setup, but the picture is good (I hope!). :)

A couple of years ago, some folks were reporting that the Wilwood spring isn't strong enough to fully release the emergency brake. I added a 3-1/4" length, 7/16" O.D., .062 wire gauge (Hillman Item # 540120, #40) spring, as well as a 1/2" E-clip to retain the parking brake on the caliper.

Cheers,


John

https://farm5.staticflickr.com/4312/35455970924_40689c38e6_k.jpg (https://flic.kr/p/W287Tw)IMG_3534 (https://flic.kr/p/W287Tw) by jhsitton (https://www.flickr.com/photos/91016165@N07/), on Flickr