LS3 Engine Mount PNs

[Shoeless]

Hey guys,

I'm doing some searching and am about to order engine stands, engine mounts, heat shields, and all associated hardware to mount my LS3 and would like to make sure I'm searching for and choosing the right PNs. It appears like the main PNs are easy to track down, unless there is some compatibility issue I'm missing, but the associated hardware is what I really want to make sure I get right.

Anyone gone through this exercise and can share some PNs or feedback?

Thanks!!!

[Roger Reid]

I bought my engine mounts as a pair from E Bay. here are the part numbers.

Engine Motor Mount Brackets Rh Lh Pair 10349964 10349965

I also used the Hinson vibration mounts. https://www.ebay.com/itm/HINSON-Urethane-Engine-Mounts-OEM-Height-Corvette-C5-C6-GTO/282535026509?fits=Model%3ACorvette&epid=1355860007&hash=item41c8665f4d:g:C78AAOSw9LlakE15&vxp=mtr

[Shoeless]

I bought my engine mounts as a pair from E Bay. here are the part numbers.

Engine Motor Mount Brackets Rh Lh Pair 10349964 10349965

I also used the Hinson vibration mounts. https://www.ebay.com/itm/HINSON-Urethane-Engine-Mounts-OEM-Height-Corvette-C5-C6-GTO/282535026509?fits=Model%3ACorvette&epid=1355860007&hash=item41c8665f4d:g:C78AAOSw9LlakE15&vxp=mtr

Thanks Roger!!! How do you like the Hinson Mounts? They look like a nice middle ground between OEM and fully rigid.

[Roger Reid]

Thanks Roger!!! How do you like the Hinson Mounts? They look like a nice middle ground between OEM and fully rigid.

Actually I'm using the Pfadt mounts with no issued. Very similar to the Hinson. If I had to do it over again I would use the Hinson. Less money.

[Shoeless]

Actually I'm using the Pfadt mounts with no issued. Very similar to the Hinson. If I had to do it over again I would use the Hinson. Less money.

Thank you Sir.