hutchjc1
03-10-2018, 08:02 AM
I have a bent rear shock and need to replace it, so if you have upgraded I would be interested in your cast off ! I have already bought the lighter springs from Breeze so I am covered there. I believe the cause was from the body of the shock ( actually the treaded section of the preload sleeve ) hitting on the mount. I have removed the interference but have not driven it yet. While working on the car I have been trying to see how much the suspension would move with the lighter springs and was noticing it was not really moving....and the side with the bad shock would not settle to within 1 to 2 inches of the opposite side of the car when set down on the wheels. I put a jack under the frame and lifted the car off of the suspension and you could see the axle travel with the body and then suddenly drop as the weight of the rear etc. over came the stiction in the shock.
Any how, if you have an odd ball shock or pair please let me know ! I am assuming that all the kits have shipped with the same basic shocks, mine is # 502 from early 2012 if there is a difference.
Thanks for any help.
hutchjc1@jhuapl.edu or 443-280-7843 if you have one !
Any how, if you have an odd ball shock or pair please let me know ! I am assuming that all the kits have shipped with the same basic shocks, mine is # 502 from early 2012 if there is a difference.
Thanks for any help.
hutchjc1@jhuapl.edu or 443-280-7843 if you have one !