Donor spindles to Factory Five upper/lower control arms [Archive]

Higgybulin

02-14-2018, 09:12 AM

Will donor spindles attach to the Factory Five upper/lower control arms? Spindles are 99-04
Thanks again,
Higgy

edwardb

02-14-2018, 09:50 AM

Short answer yes. With the required upper ball joint adapter. http://www.factoryfiveparts.com/13819-1987-2004-spindle-adapter-bracket/. That spindle is also slightly wider than previous versions. About 3/8-inch per side as I understand. The earlier SN-95 version with the dogleg (vs. straight) steering arm is the preferred donor spindle FWIW.

Higgybulin

02-14-2018, 10:00 AM

Short answer yes. With the required upper ball joint adapter. http://www.factoryfiveparts.com/13819-1987-2004-spindle-adapter-bracket/. That spindle is also slightly wider than previous versions. About 3/8-inch per side as I understand. The earlier SN-95 version with the dogleg (vs. straight) steering arm is the preferred donor spindle FWIW.

Thanks Paul! When you say wider, do you mean the stance will be wider? I have already acquired the ball joint adapters.
Edit...just acquired the 94-95 spindle with the dog leg!