View Full Version : Need help with Rear Brake Caliper
Tex2131
02-02-2018, 12:17 PM
Can anyone tell me how to install the two clips at the bottom of the picture? Want to make sure
I get this right. Thanks, Don
80305
JoeAIII
02-02-2018, 07:31 PM
They go on either side of the bracket where the tabs on the side of the pads ride in them
They are anti rattle clips and keep the pads from rattling against the bracket there by applying a little bit of pressure on the guide tabs
Tex2131
02-02-2018, 09:20 PM
Thanks! That helped me figure it out. Don
japollon
02-03-2018, 12:25 PM
Can someone show a picture of their installation?
Can someone show a picture of their installation?
Go here
https://turn5.scene7.com/is/image/Turn5/386333?$enlarged810x608$
Itchief
02-03-2018, 10:12 PM
I’m not sure if this will help
80345
Tex
If you are building a complete kit with the willwood petal box and the Ford GT brakes front and rear I would replace the stop tech brake pads with a more aggressive pad
The stop tech pads require a LOT of pressure to lock up the brakes and make a lot of brake dust
Several vendors made a more aggressive pad I installed EBC blue stuff pads and they made the car have a lot better brake response
Hope you have a great time building the car
Rick