PDA

View Full Version : Hose identification and turbo inlet question



SnyderJD
01-27-2018, 04:47 PM
Driver hand side of my 04 ej205, what is this connection that I have circles in red? It was sitting near the Intercooler BOV... assuming it is not the BOV as that is connected with a u hose near the center of the intake...

https://farm5.staticflickr.com/4763/39222680864_1b5f44ceae_z.jpg (https://flic.kr/p/22KYuwm)


Figured my turbo inlet hose question out...

SnyderJD
01-27-2018, 06:53 PM
OK so, I think I have it figured out.... TGV Vacuum vents to atmosphere?

EODTech87
01-27-2018, 10:41 PM
That's correct. You planning on deleting the valves?

SnyderJD
01-27-2018, 11:25 PM
Yeah I plan on deleting tgv’s, adding Air oil sep etc. but wanted to get the motor running and make sure there were no issues before I start removing things and changing them around. It a lot of experience with Subaru motors. So figured stock was a good place to start.