Log in

View Full Version : Coyote Dyno pull & pricing $12,705.00



mike forte
01-25-2018, 12:03 PM
Hi Guys,
If you want to hear a Coyote we ran on our Land & Sea dyno, it makes fantastic power and drives incredible.
Currently the Coyote Engine & TKO package sells for $12,705.00
Parts include;
M-6007-M50A Coyote engine
M-6017-504V Engine control package & harnes
M-8600-M50BALT Alternator kit
M-9680-M50A Coyote engine cover kit
Mini Starter & bolts
Ram 11 inch 26 spline clutch kit
Clutch bolt kit & dowels
Timken throwout bearing
5.0/4.6 clutch fork & fork pivot ball
M-6392-M46 bellhousing including block plate & hardware kit
TCET5008 TKO-600 transmission
Oil filter nipple
Moroso 20570 & 24570 oil pan & pickup (aluminum pan option available soon)
Call & ask Mike about free shipping in 48 states.

Coyote dyno pull 462.1 hp 435.9 torque

https://www.youtube.com/watch?v=fVd1CxZCf0w

mike forte
01-25-2018, 08:19 PM
Hi Guys,
Do you want your engine to rev quicker?These parts really work.
If you are Roadracing the ACT lightweight flywheel reduces your reciprocating weight by 12 lbs!
The Quartermaster Dual Disc clutch & flexplate weighs just 18 lbs.

https://www.youtube.com/watch?v=1_mzIscdGZM&t=3s

CobraboyDR
01-25-2018, 08:36 PM
Hi Guys,
Do you want your engine to rev quicker?These parts really work.
If you are Roadracing the ACT lightweight flywheel reduces your reciprocating weight by 12 lbs!
The Quartermaster Dual Disc clutch & flexplate weighs just 18 lbs.

https://www.youtube.com/watch?v=1_mzIscdGZM&t=3sI share your enthusiasm on light flywheels.

I had an aluminum flywheel on my 427 side-oiler, and that thing would wind up quickly, much more than a similar engine with a typical iron flywheel. Superior throttle response, IMO.

mike forte
01-25-2018, 08:57 PM
Lightweight flywheels engine sounds fantastic!!! Almost like a bike...

BEAR-AvHistory
01-26-2018, 01:10 PM
Hi Mike,

The M-6007-M50A Coyote engine is 435 Gross by FORD. What did you do to increase the power? Reason I ask we are about to install this engine into a club members MkIV kit in a few weeks. If you have added anything to the engine the guy who owns the kit might be looking to buy them.

mike forte
01-26-2018, 10:26 PM
Hi Kevin,
The engine we dynoed was a M-6007-M50 2014 & earlier Coyote. Fordrates the HP net at the rear tires. We dyno just the engine and measures almost exactly 10% driveline power difference.
The M-6007-M50A is 2015+ and is more powerful, but I haven't dynoed one yet.

BEAR-AvHistory
01-27-2018, 12:21 PM
Thanks Mike.