MK4 What is this part 10954 for?

[broku518]

Hello,
Doing some prep for cooling system. I noticed this part, 10954, in 10760 Fan mounting components. These are 2x fan mount bars, 1/16" steel plates.
I don't see manual mentioning those, likely some improvement or else...

Can someone post some pics from their fan cooling assembly, please? No mods please, I am using the parts provided in complete kit.
Or point me to some video link.

Thanks,
Martin

https://farm5.staticflickr.com/4644/38516149105_5676c7dd88_z.jpg (https://flic.kr/p/21Fxkfi)20171230_141359 (https://flic.kr/p/21Fxkfi)

[DadofThree]

this may not help you now, but I hope this helps you later. It did me. At the Virginia International Raceway Factory five had their display car there. I took a detailed video on a lot of components that i was unsure of. Unfortunately it doesn't contain the two brackets. But it does contain a lot of info.
Dave

https://youtu.be/LWG_waRxO1w

[Norm B]

Those are brackets to mount the electric fan on the donor shroud from a Mustang.

HTH
Norm

[Dagwoods]

Yup, Norm beat me to it. Page 273 in my PDF manual shows it for mounting donor 87-93 fan.

[rich grsc]

It's just amazing the stuff you find in the manual.

[Jeff Kleiner]

It's just amazing the stuff you find in the manual.

Yeah Rich, but who bothers to read those things when you can just post a question on the forums instead ;)

Jeff

[broku518]

Yup, Norm beat me to it. Page 273 in my PDF manual shows it for mounting donor 87-93 fan.

Thanks for the info. I don't have PDF, using the phone book manual.

[wallace18]

There is usually a few parts in the complete kit that only are for the base kit and you won't use.

[slpro1207]

Yeah Rich, but who bothers to read those things when you can just post a question on the forums instead ;)

Jeff

If I didn’t have the forum to post the question I would have to ask my wife to read the manual to me again. ;)