View Full Version : Adjustable front upper control arms
mikeinatlanta
12-28-2017, 11:15 PM
To fit Gen 1. Anybody know a source?
Thanks
Mike
Speciality alignment you can pm me for more info
Roger Reid
12-28-2017, 11:38 PM
http://www.parts123.com/parts123/yb.dll?parta~dyndetail~Z5Z5Z50000050f~Z5Z5Z523722~ P459.00~~~~S53D1EEP1369957112350h~Z5Z5Z5~Z5Z5Z5000 0050o~~~
mikeinatlanta
12-29-2017, 02:08 PM
Both leads did not pan out. I'm looking for C-5 parts 97-04. Both leads only go up to 1996.
Still looking...
Thanks,
Mike
beeman
12-29-2017, 02:35 PM
Yep, no off the shelf options exist. Been down that road. One guy on here made a few. I cut and re-welded the UCA mounts.
I also added some anti-dive. My numbers now are:
7.5 caster
1.15 camber
1/16 toe
Had a wide range of options up to 3 of camber and 9+ of caster.
mikeinatlanta
12-29-2017, 03:53 PM
Aluminum on finished car is riveted and bonded. Otherwise moving mounts is the way to go.
beeman
12-29-2017, 04:42 PM
Aluminum on finished car is riveted and bonded
Didn't stop me!
But... Will make your wheels move towards the rear of the car... I'm guessing you are looking for caster?
mikeinatlanta
12-29-2017, 05:25 PM
Yes, need some caster. The aluminum would be destroyed removing. Something for guys to think about when selecting an adhesive for their aluminum.
This is for Troy's car. Going for 200 this March and he wants to stabilize a bit.
beeman
12-29-2017, 06:49 PM
That's a great reason to get some more caster!