Pedal Box

[eamici]

I'm not having fun with this pedal box. Do these two pics make sense? The video from FF looks a lot different than mine. Also there was a bag of dozens of bolts, screws nut etc and no real instructions. Is there supposed tp be a switch that goes w the clutch quadrant?

ARGGGGHHH

[Papa]

I'm not having fun with this pedal box. Do these two pics make sense? The video from FF looks a lot different than mine. Also there was a bag of dozens of bolts, screws nut etc and no real instructions. Is there supposed tp be a switch that goes w the clutch quadrant?

ARGGGGHHH

Your picture didn't post, but here is a picture of the switches you need to install for the brake light and clutch safety switch.

https://farm5.staticflickr.com/4229/35664659531_14cedd18ba_b.jpg (https://flic.kr/p/WkyGJX)

[eamici]

Thanks. I definitely did not get the second switch.
Do you have any pics with the Clutch pedal?

[Papa]

Thanks. I definitely did not get the second switch.
Do you have any pics with the Clutch pedal?

Not sure if this on will help ...

https://farm5.staticflickr.com/4413/36654467466_7716ca0a41_b.jpg (https://flic.kr/p/XR2Ja1)

[phileas_fogg]

The complete kit comes with neither a second switch nor mounting bracket; you need to purchase both. The bracket you can get from F5; when I requested one they charged some small fee and tossed it in an envelope so that shipping was for all intents and purposes free. You can get a second switch at NAPA (ask for their equivalent of a Duralast DR496 switch) or Amazon (ACDelco D885 Brake Light Switch https://www.amazon.com/ACDelco-D885-Original-Equipment-Switch/dp/B0013FDN5A). Some folks report better success with the ACDelco switch; it's slightly longer and so requires you to disengage the clutch completely.

NOTE; Be extra sure to pay attention to which side of the cross member you place the mounting bracket! If you put it on the wrong side, the switch isn't long enough and won't work. Ask me how I know. You'll need some snap ring pliers to remove the pedal arm to get the mounting bracket on the correct side.

Cheers,


John

[Papa]

My kit came with two switches and two mounting tabs.

[phileas_fogg]

My kit came with two switches and two mounting tabs.

That's good to hear; my kit was delivered in June of 2015, so admittedly my information is dated.


John

[edwardb]

I'm not having fun with this pedal box. Do these two pics make sense? The video from FF looks a lot different than mine. Also there was a bag of dozens of bolts, screws nut etc and no real instructions. Is there supposed tp be a switch that goes w the clutch quadrant?

ARGGGGHHH

The Wilwood pedal box preparation, including the switches, installation, etc. is in the build manual. Also the modification for the clutch to be cable driven if that's your build plan. Did you receive a copy?

Videos are useful to get an idea, but many more details in the manual.

[eamici]

I can see why you need a brake lite switch but why does the clutch need one?

[Papa]

I can see why you need a brake lite switch but why does the clutch need one?

To prevent the car from being started unless the clutch is depressed. It keeps someone from hitting the starter with the car in gear and having the car lunge forward.

[Papa]

Thanks. I definitely did not get the second switch.
Do you have any pics with the Clutch pedal?

Here's another picture with some of the clutch pedal components shown.

https://farm5.staticflickr.com/4240/35763524936_2554b0dda6_b.jpg (https://flic.kr/p/WuipYU)

The manual pretty clearly describes the assembly of the quadrant and adjuster. It doesn't describe removal and reinstallation of the pedal from the bracket that you need to drill for the switch mounting plate, but all you need is a set of ring pliers, some good eyes, and a little patience and you'll get it done.

[eamici]

Hi Edward, yes I did get the manual. Part of my problem I believe is that some things are missing from the bag of parts.
First off I only got one switch. Second, I don't seem to have any of the parts for the Clutch pedal stop mount on Pages 122-123.

[Boydster]

Did you do a complete inventory when the kit arrived?

My kit was delivered Feb 17 and was complete with 2 switches and all required brackets.