Which Is The High Pressure Port?

[Papa]

Before I install my power steering lines, I want to be sure I connect them correctly. I thought the high-pressure port was the one on the bottom, but the plugs in my rack have me second guessing that with the red plug on the top port.

https://farm5.staticflickr.com/4639/24236253957_967463fb36_b.jpg (https://flic.kr/p/CVF8Vx)

[Gordon Levy]

The lower

[Papa]

Thank you, Gordon.

[jlfernan]

If that's an FFR rack and your're going to use AN hoses, you're going to need these.

https://www.summitracing.com/parts/uis-8026070/overview/

[Papa]

If that's an FFR rack and your're going to use AN hoses, you're going to need these.

https://www.summitracing.com/parts/uis-8026070/overview/

I'm going to try to use the lines provided with the kit. If I don't like the result. I'll look at AN hoses.

[Gordon Levy]

Use adapters and proper make pressure for the feed and standard AN for the rest. Make sure you put cooler in the system

[Itchief]

Gordon

Thanks for the note about the oil cooler I missed that on mine and it helps explain my power steering pump issue

Sometimes it’s the simple things

Rick