fact5racer
11-28-2017, 09:19 PM
Anybody know the ideal oil cooler size for the lower front opening? Brand?
Todd Baumann
12-02-2017, 10:24 PM
This is the one that fits and is identical one to what FFR used to sell except for the fittings size now.
Earl's Performance Temp-A-Cure Fluid Coolers 81300ERL
Earl's Performance AN to Straight Cut O-Ring Fittings 585108ERL
HTH
Todd
Mark Reynolds
01-11-2019, 01:54 PM
The Breeze oil cooler is 3.75" tall (13 rows) and 11.25 wide plus the length of the side wings.
https://www.breezeautomotive.com/shop/oil-cooler-kit-with-thermostatic-sandwich-take-off-plate/
By the way it is a Mocal and made in the original factory in England same as the originals I am told.
This is sized for the Roadster so you don't need spacers to hold the cooler down below the lower radiator aluminum. I think the original size is shorter on the 289 and if that is your applicatoin Breeze can also supply a 10 row cooler which is about 3" tall or a 7 row which is about 2" tall.