AC pedals

[feadam]

Has anyone put the AC pedals over the stock type pedals, if so how did you bond them to the metal on the pedals?

[phileas_fogg]

Both Forte (http://www.fortesparts.com/factory-five-kit-cars/wilwood-pedal-pads) and ********** (http://www.**********accessories.com/p-81-ac-pedal-pads.aspx) have bolt on pedals. I'd call Forte and tell him what you need; he's extraordinarily knowledgeable, competitively priced, and his customer service can't be beat.


John

[Gumball]

I cut off the original pedal pads from the donor brake/clutch combo and welded on a couple of tabs, to which I mounted the AC pedals.

http://i845.photobucket.com/albums/ab15/CCRsAC/img_4144.jpg (http://s845.photobucket.com/user/CCRsAC/media/img_4144.jpg.html)

I also notched the brake lever so that the AC pedal would have room to articulate....

http://i845.photobucket.com/albums/ab15/CCRsAC/img_3977.jpg (http://s845.photobucket.com/user/CCRsAC/media/img_3977.jpg.html)

[feadam]

has anyone just ground off the mount on pedal and used a bonding agent to attach them?

[mike223]

has anyone just ground off the mount on pedal and used a bonding agent to attach them?

I cut (+ ground) off the mount on the pedal and used 4 small flat head Allen screws on each.

I picked a (black) screw head that would countersink in the (black) lines of the AC pedal - in the lines above and below the AC emblem.

Drilled through original SN95 pedals to attach.


Works great.

IIRC, I had to rearrange the angle of the brake pedal, which got a significant rework for manual brakes anyway (6:1 / length mod).

[Gumball]

One nice feature of how I installed mine is that they rotate through the pedal travel - keeping them flat on my foot without over-articulating my ankles. I spring-loaded them, too, so they don't flop down or rattle when at rest.

[mike223]

One nice feature of how I installed mine is that they rotate through the pedal travel - keeping them flat on my foot without over-articulating my ankles. I spring-loaded them, too, so they don't flop down or rattle when at rest.

Afterthought - I may have rearranged the angle on the clutch pedal too.

One of the beauties of the SN95 pedal box is that they are steel and (relatively) easily reworked to how + where you want them to fit in the foot box.

[clancypm]

I cut the old pedals off, put the pedal arms on a vice and bent them to the right angle, drilled a hole in pedal arms that matched the AC pedal holes and bolted them together.