Ron Francis and Speedhut

[3kcarbon]

With the RF harness already in place do I need to run the Speedhut harness to the Speed Sensor and Fuel Level or can I just splice into the RF harness. . I see only one wire from the fuel level. I assume the other goes to ground. The Speedhut harness has two wires and I assume one is ground. If I connect one and ground the other will it work? If its best to run the harness fine thats what I'll do. I just don't know if there is a advantage to the extra wires.

[Jesper Ingerslev]

I don't have the instructions infront of me that come with in the gauge box but if I recall it says that one of the wires for the fuel level can get grounded. I will double check in the morning

[Jesper Ingerslev]

Just checked the instructions, use the wire in the Ron Francis harness and ground the black sender wire from the gauge.

http://www.factoryfive.com/whatsnew/tech/images/fuel%20level.jpg

[3kcarbon]

Thanks! Ithought it would be ok but I would rather ask first..