Suicide Door Wire Looms

[DarthTedious]

Question for the community, for people who have run power windows or locks that required wiring to the doors, what did y'all use to protect the wires at the hinges? I have picked up some suicide door looms from speedway, but the geometry of the door hinge makes the braided steel drag really badly on the grommet. These (https://www.speedwaymotors.com/Speedway-Door-Wiring-Loom-Conduit-Kit,5349.html)are what I have, maybe they aren't really meant for suicide door applications, but searching around doesn't seem to show much else.

Appreciate the help,

Darth

[michael everson]

Check with Painless for Jam-Tac contacts.
Mike

[DaveS53]

I use the 7 pin contacts from Carolina Customs. That will operate power windows, power safety pins, power door latches and a dome light.

http://www.carolinacustom.com/pages/product_pages/door_jamb_wire_eliminators/door_jamb_wire_eliminators_page.jsp

My doors fit so tight that I had to recess the jamb side into the jamb. That was a real pain. On the good side they also act as door poppers.

[kraftee]

I looked into the pin contacts looms from Carolina Customs, but after doing some research, many people had a really tough time getting them to work reliably. Plus, the spacing in the door jambs on a FFR 33 just don't lend themselves to contact-type looms. So I just bought a pair of eight-dollar rubber s-shaped accordion boots from Summit. Simple, cheap, they work perfectly - and you don't have to worry about making that iffy connection with the pin-contact type.

[1932]

Do you have part #

[kraftee]

Summit Part# ELI-4301-70-011

https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=eli-4301-70-011

[1932]

Thanks, i looked but did not see it before.

[Brave Salmon]

I too looked for these but never saw them at Summit. Thanks for the tip. These look just like the ones on my dodge ram truck. Placed the order today.