Custom muffler source

[PMad]

It's been a while since I've been here so excuse me if this has been covered recently. I did a search and couldn't find what I needed. I need a quieter option for the supplied side pipes to pass track noise restrictions on my gen 2 coupe. I seem to remember the Karen Salvaggio had a set made for her coupes by a shop in CA. I also have a friend who has a Lotus replica looking to have something done as well. Does anyone have the contact info or another source?

Thanks,

[GoDadGo]

Spitech will build custom mufflers; however, I'm not sure if they will build the type of muffler that you are looking for.
They do offer a host of Oval Shaped tubing and bends as well so I hope they can help.

http://spintechmufflers.com/

Also, Stainlessworks offers some pretty neat stuff too.

http://stainlessworks.net/products/exhaust-builds/mufflers

[John Dol]

Ask Garry Bopp. He had a set on his coupe.

John

[narkosys]

I believe it was Mark Dougherty who made the exhaust for Karen Salvaggio.

[John Dol]

Mark made a set for Chris.

Here's the parts list for that, but it's not the same as the exhaust you are asking about

The mufflers we used were Thrush Stainless Steel Glasspack Mufflers 24239 from summit 100 each. we used these so they would slide into the new 2 1/2 stainless pipes.
So to recap
stock FFR headers
4) 2" - 2 1/2" reducers
4) 2 1/2" stainless 30 deg. bends
4) thrush stainless mufflers
4) 2 1/2" stanless 90 deg bends

John

[John Dol]

Raptor Racing polished stainless, re-packable, single muffler sidepipes

Those are the ones you want.

John

[j65mustang]

My dad works and manages spintech mufflers, we are in the process of building headers and couple different mufflers designs for my gen 3 coupe. we can build you anything you want, if you have any questions give us a call and ask for bill.

[steveseymore]

If anyone has run their car in the SCCA National Solo events can you share your setup and experience with the sound meter. I know many autocross regularly, but I haven't found any posts that mention which setups fell under/over the limit. Thanks in advance.

Steve

[plschulten]

The Flowmaster sidepipes are nice pretty quiet too.

[PMad]

John, a Google search came up with a shop in Fresno, CA. A quick check of their web site looks like they just sell parts, no mention of fabrication services.

Thanks

[PMad]

My dad works and manages spintech mufflers, we are in the process of building headers and couple different mufflers designs for my gen 3 coupe. we can build you anything you want, if you have any questions give us a call and ask for bill.

Thanks!

[John Dol]

John, a Google search came up with a shop in Fresno, CA. A quick check of their web site looks like they just sell parts, no mention of fabrication services.

Thanks

PM Garry Bopp as I said, he'll know where to steer you.

John

[Garry Bopp]

I had a set of the Raptor Racing single sidepipes on my Daytona Coupe, polished stainless, repackable. I picked up 42 rear wheel horsepower, no other changes on my 422" Windsor ... and the sound quality was much improved. Doug Marino was the guy that did my pipes at Raptor ... here's the phone number I have from him about 5 years ago: 559-706-2226. Good luck!

Garry

http://i142.photobucket.com/albums/r102/theboppshop/Glass%20Hatch%20and%20Raptor%20SidePipes/EastCoastTourJune2014220_zps1ec181ec.jpg (http://s142.photobucket.com/user/theboppshop/media/Glass%20Hatch%20and%20Raptor%20SidePipes/EastCoastTourJune2014220_zps1ec181ec.jpg.html)

[PMad]

I had a set of the Raptor Racing single sidepipes on my Daytona Coupe, polished stainless, repackable. I picked up 42 rear wheel horsepower, no other changes on my 422" Windsor ... and the sound quality was much improved. Doug Marino was the guy that did my pipes at Raptor ... here's the phone number I have from him about 5 years ago: 559-706-2226. Good luck!

Garry

http://i142.photobucket.com/albums/r102/theboppshop/Glass%20Hatch%20and%20Raptor%20SidePipes/EastCoastTourJune2014220_zps1ec181ec.jpg (http://s142.photobucket.com/user/theboppshop/media/Glass%20Hatch%20and%20Raptor%20SidePipes/EastCoastTourJune2014220_zps1ec181ec.jpg.html)

Thanks Gary!

[Mark Dougherty]

Raptor racing has the best pipes on the market for the FFR coupes

[Bill Waters]

Thanks, Mark, Garry

[Gordon Levy]

Here is a vid of a header and pipe system we built. It is surprisingly quiet.
https://www.facebook.com/levyracing/videos/10155803277407888/