Positioning the CNC 1483 Reservoir

[4.6 litre]

Guys,

I'm trying to locate the post that shows the dimensions for positioning the CNC triple reservoir. The post showed how far the reservoir top can be positioned below the 3/4 bar and the maximum distance it can be positioned from the DS front foot box panel. Does anyone have a link to that post or can anyone answer the question for me?

FYI, my engine is a coyote w/o power brakes.

Thanks,

Damien

[Jdav]

No dimensions, but here is WarEagleScotts post about it:
http://thefactoryfiveforum.com/showthread.php?21312-Wareaglescott-s-Coyote-build-thread-INDEX-ADDED-TO-POST-1&p=245195&viewfull=1#post245195

EdwardB's build thread may have info as well

[CDXXVII]

Thread is in the other forum.

Here

http://www.ffcars.com/forums/17-factory-five-roadsters/274135-how-did-you-attach-your-cnc-brake-reservoir.html#post2500078

Another thing to keep in mind. Make sure the reservoirs are level to the ground when at ride height.

[wareaglescott]

No dimensions, but here is WarEagleScotts post about it:
http://thefactoryfiveforum.com/showthread.php?21312-Wareaglescott-s-Coyote-build-thread-INDEX-ADDED-TO-POST-1&p=245195&viewfull=1#post245195

EdwardB's build thread may have info as well

Turns out where I put it the engine oil dipstick is tight against it coming in and out. Works ok but if I were to do it again I would move it forward about 1/2-3/4" for the coyote.